[Asterisk-Users] chan_capi_cm-0.6.1: ISDN1: too much voice to send for NCCI=0x10101

[Matt Riddell]

Hi,

I have an AVM Fritz card at a customer location that is crashing whenever it
tries to play a sound file.

Any ideas?

  == Started pbx on channel CAPI/ISDN1/11596446-0
    -- Executing Answer("CAPI/ISDN1/11596446-0", "") in new stack
  == ISDN1: Answering for 11596446
CONNECT_RESP ID=001 #0x01b6 LEN=0042
  Controller/PLCI/NCCI            = 0x101
  Reject                          = 0x0
  BProtocol
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
  ConnectedNumber                 = <00 80>11596446
  ConnectedSubaddress             = default
  LLC                             = default
  AdditionalInfo
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default

    -- Executing BackGround("CAPI/ISDN1/11596446-0", "beep") in new stack
    -- Playing 'beep' (language 'en')
CONNECT_ACTIVE_IND ID=001 #0x01b7 LEN=0015
  Controller/PLCI/NCCI            = 0x101
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP ID=001 #0x01b7 LEN=0012
  Controller/PLCI/NCCI            = 0x101

CONNECT_B3_IND ID=001 #0x01b8 LEN=0013
  Controller/PLCI/NCCI            = 0x10101
  NCPI                            = default

CONNECT_B3_RESP ID=001 #0x01b8 LEN=0015
  Controller/PLCI/NCCI            = 0x10101
  Reject                          = 0x0
  NCPI                            = default

CONNECT_B3_ACTIVE_IND ID=001 #0x01b9 LEN=0013
  Controller/PLCI/NCCI            = 0x10101
  NCPI                            = default

CONNECT_B3_ACTIVE_RESP ID=001 #0x01b9 LEN=0012
  Controller/PLCI/NCCI            = 0x10101

       > ISDN1: too much voice to send for NCCI=0x10101
       > ISDN1: too much voice to send for NCCI=0x10101
DATA_B3_IND ID=001 #0x01ba LEN=0030
  Controller/PLCI/NCCI            = 0x10101
  Data32                          = 0x6f1e7e
  DataLength                      = 0xa0
  DataHandle                      = 0x0
  Flags                           = 0x0
  Data64                          = 0x0

localhost*CLI>
Disconnected from Asterisk server


-- 
Cheers,

Matt Riddell
_______________________________________________

http://www.sineapps.com/news.php (Daily Asterisk News - html)
http://freevoip.gedameurope.com (Free Asterisk Voip Community)
http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss)