[Asterisk-Users] can't receive calls with CAPI ISDN

Armin Schindler armin at melware.de
Mon Nov 21 12:15:33 MST 2005


That's normal. Only the MSN (not the full number including area code) is
transmitted as called-party-number.

Armin

On Mon, 21 Nov 2005, Amaury BOSSE wrote:
> Hi list,
> 
>  
> 
> I am testing my ISDN fritz card USB with my Asterisk box and I have a
> problem.
> 
> I can originate calls but I can't receive them.
> 
> I have made a DID redirection in order to send incoming ISDN calls to a SIP
> phone but capi debug seems to get calls as 2860 instead of 05XXXX2860.
> 
> You can see a copy of capi debug when I try to receive a call.
> 
> Can someone help me to resolve this problem?
> 
>  
> 
> Thanks
> 
> Amaury
> 
>  
> 
> CONNECT_IND ID=001 #0x0d71 LEN=0053
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>   CIPValue                        = 0x4
> 
>   CalledPartyNumber               = <81>2860
> 
>   CallingPartyNumber              = <21 80>870441307
> 
>   CalledPartySubaddress           = default
> 
>   CallingPartySubaddress          = default
> 
>   BC                              = <90 90 a3>
> 
>   LLC                             = default
> 
>   HLC                             = default
> 
>   AdditionalInfo                  = default
> 
>  
> 
>     -- CONNECT_IND
> (PLCI=0x101,DID=2860,CID=870441307,CIP=0x4,CONTROLLER=0x1)
> 
>        > ISDN1: msn='*' DNID='2860' MSN
> 
>   == ISDN1: Incoming call '0870441307' -> '2860'
> 
> INFO_IND ID=001 #0x0d72 LEN=0017
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>   InfoNumber                      = 0x1e
> 
>   InfoElement                     = <84 81>
> 
>  
> 
> INFO_RESP ID=001 #0x0d72 LEN=0012
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>  
> 
>     -- ISDN1: info element PI 84 81
> 
>        > ISDN1: Not end-to-end ISDN
> 
> INFO_IND ID=001 #0x0d73 LEN=0020
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>   InfoNumber                      = 0x70
> 
>   InfoElement                     = <81>2860
> 
>  
> 
> INFO_RESP ID=001 #0x0d73 LEN=0012
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>  
> 
>     -- ISDN1: info element CALLED PARTY NUMBER
> 
>        > ISDN1: INFO_IND DID digits not used in this state.
> 
> INFO_IND ID=001 #0x0d74 LEN=0016
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>   InfoNumber                      = 0x18
> 
>   InfoElement                     = <89>
> 
>  
> 
> INFO_RESP ID=001 #0x0d74 LEN=0012
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>  
> 
>     -- ISDN1: info element CHANNEL IDENTIFICATION 89
> 
> INFO_IND ID=001 #0x0d75 LEN=0016
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>   InfoNumber                      = 0xa1
> 
>   InfoElement                     = <a1>
> 
>  
> 
> INFO_RESP ID=001 #0x0d75 LEN=0012
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>  
> 
>     -- ISDN1: info element Sending Complete
> 
> CONNECT_RESP ID=001 #0x0d75 LEN=0032
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>   Reject                          = 0x1
> 
>   BProtocol                      
> 
>    B1protocol                     = 0x0
> 
>    B2protocol                     = 0x0
> 
>    B3protocol                     = 0x0
> 
>    B1configuration                = default
> 
>    B2configuration                = default
> 
>    B3configuration                = default
> 
>   ConnectedNumber                 = default
> 
>   ConnectedSubaddress             = default
> 
>   LLC                             = default
> 
>   AdditionalInfo                 
> 
>    BChannelinformation            = default
> 
>    Keypadfacility                 = default
> 
>    Useruserdata                   = default
> 
>    Facilitydataarray              = default
> 
>  
> 
> DISCONNECT_IND ID=001 #0x0d76 LEN=0014
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>   Reason                          = 0x0
> 
>  
> 
> DISCONNECT_RESP ID=001 #0x0d76 LEN=0012
> 
>   Controller/PLCI/NCCI            = 0x101
> 
>  
> 
>   == ISDN1: CAPI Hangingup
> 
>   == ISDN1: Interface cleanup PLCI=0x101
> 
> 



More information about the asterisk-users mailing list