[Asterisk-Users] Sipura SPA-841 Second Line Help

[Dave Morrow]

Thanks Jerry.  It's working now.

One question comes to mind though. In order for it to work, I had to set
the second line to "private".  When would one use "shared" then with
these units? 



David A. Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow at Autodata.Net
http://www.autodata.net

* PLEASE NOTE THAT EFFECTIVE DEC 1,2005 MY TELEPHONE NUMBER WILL CHANGE
*

NEW !!! Tel: (519) 963-3020
Fax: (519) 451-6615 

< Poor planning on your part does not necessarily constitute an
emergency on my part! >

This message has originated from Autodata Solutions. The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator at autodata.net <mailto:Administrator at autodata.net>

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jerry
Jones
Sent: Friday, November 18, 2005 9:05 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Sipura SPA-841 Second Line Help

You cannot have multiple devices registering with the same name in
asterisk.
Only the most recent to register will actually receive the call.
Create a new registration ie 9001, 9002, etc on each of the phones then
have 9000 ring all of them.

On Nov 18, 2005, at 7:32 AM, Dave Morrow wrote:

> Hi all, I recently purchased Sipura SPA-841 phones for a group of 
> users.  While the phones are functioning great, I am having some 
> troubles configuring one aspect.  Hopefully someone will know what I 
> am doing wrong.
>
> On each of the phones, I have configured Line 1 as a private line.  
> That's working fine.
> My requirement is to have an extension 9000 ring on all of the phones'

> second line.
> I've configured this extension in asterisk (extensions.conf and
> sip.conf) as I would any other extension.
> Inside the SPA-841 interface, I configured Ext 2 with the appropriate 
> SIP information and set the line appearance to "Shared"
>
> In the "Phone" tab, I set the line appearance to shared.
>
> With all this configured.  It doesn't work.  L2 on each of the phones 
> simply flashes red and does not work.
>
> Any help would be greatly appreciated!
>
>
> David A. Morrow
> Technical Systems Lead
> Autodata Solutions Company
> David.Morrow at Autodata.Net
> http://www.autodata.net
>
> * PLEASE NOTE THAT EFFECTIVE DEC 1,2005 MY TELEPHONE NUMBER WILL 
> CHANGE *
>
> NEW !!! Tel: (519) 963-3020
> Fax: (519) 451-6615
>
> < Poor planning on your part does not necessarily constitute an 
> emergency on my part! >
>
> This message has originated from Autodata Solutions. The attached 
> material is the Confidential and Proprietary Information of Autodata 
> Solutions. This email and any files transmitted with it are 
> confidential and intended solely for the use of the individual or 
> entity to whom they are addressed. If you have received this email in 
> error please delete this message and notify the Autodata system 
> administrator at Administrator at autodata.net 
> <mailto:Administrator at autodata.net>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users