[Asterisk-Users] wcfxo loads correclty after issuing twice the command "ztcfg -vvvv" !!

[Bukoka Budoka]

Hi to all,

when i issue the ztcfg command for the first time i get the message 
"Changing signalling on channel 1 from Unused to FXS Kewlstart".

When i issue it for the second time i get the normal message "1 channels 
configured."

Has anyone any ideas of why not to have the normal behavior on the first 
place (i mean without passing from "Unused to FXS Kewlstart" and then to "1 
channels configured." ???

-------------------------------------------------------

[root at asterisk ~]# ztcfg -vvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

Changing signalling on channel 1 from Unused to FXS Kewlstart


[root at asterisk ~]# ztcfg -vvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

My Zaptel is as follows:

fxsks=1
loadzone=us
defaultzone=us
--------------------------------------------------

My zapata is as follows:

[channels]
context=outgoing
;switchtype=national
signalling=fxs_ks
;rxwink=300              ; Atlas seems to use long (250ms) winks
;flash=10000
usecallerid=no
hidecallerid=yes
callwaiting=no
usecallingpres=no
callwaitingcallerid=no
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=yes
echotraining=yes
echocancelwhenbridged=yes
rxgain=3.0
txgain=-1.0
group=1
callgroup=1
pickupgroup=1
immediate=yes
cidsignalling=bell
channel => 1


The zaptel driver as well as the wcfxo driver is loaded in rc.local:

modprobe zaptel
modprobe wcfxo
/sbin/ztcfg -vvvvv
/usr/sbin/asterisk -vvv &> /var/log/asterisk/status-log &

thank you all,

Budoka.

_________________________________________________________________
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.com/