[Asterisk-Users] dell and digium hardware

Craig Guy cguy at bigpond.net.au
Thu Nov 17 03:46:30 MST 2005


Single port TE110p and quad port TE410p.

Craig
----- Original Message ----- 
From: "Klaus Darilion" <klaus.mailinglists at pernau.at>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Thursday, November 17, 2005 1:34 AM
Subject: Re: [Asterisk-Users] dell and digium hardware


> Which digium card do you use? 1 port or 2/4 port E1/T1? or TDM?
>
> klaus
>
> Craig Guy wrote:
>> I'm using the 850 series.  Works well.  Only major problem is having to 
>> use a third party PCI-e sata raid controller, well thats if you want HW 
>> raid in your system.
>>
>> Craig
>>
>> ----- Original Message ----- From: "Kevin Hanson" <tuxpert at comcast.net>
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
>> <asterisk-users at lists.digium.com>
>> Sent: Wednesday, November 16, 2005 10:08 PM
>> Subject: Re: [Asterisk-Users] dell and digium hardware
>>
>>
>>> Klaus Darilion wrote:
>>>
>>>> Hi!
>>>>
>>>> I read in the archive a lot of problems using the Dell 1850 servers and 
>>>> digium TE4xxP and TE2xxP hardware. I wonder if ever anybody has tried 
>>>> the Dell Poweredge 850 series and can report some experiences?
>>>>
>>>> btw: Does somebody knows why there are problems with 1850 but not with 
>>>> 2850 (digium recommends the 2850 for their Business Edition)? AFAIK 
>>>> both have the same chipset and both use Intel onboard NICs.
>>>>
>>>> Thank's for any hints.
>>>> Regards
>>>> Klaus
>>>>
>>> We are using a PE 830 at a customer site (single port T1 and TDM10B [for 
>>> fax machine]).  I have had no problems.  The only thing I did was use a 
>>> pci nic and disabled the on-board ethernet.  I never tried the on-board, 
>>> so don't know if it would have caused problems.  I just saw a note on 
>>> Digium's site regarding this (but not for this particular model), and 
>>> went ahead and got an pci nic.
>>>
>>> I saw a posting once that indicated that Dell's eighth generation 
>>> hardware (800's, 1800's, 2800's) don't have problems w/ Digium cards 
>>> like the 7th gen did (700's, etc).  Don't know if this is true, but we 
>>> went ahead and tried the 830 and have been happy so far.
>>>
>>> Cheers,
>>> Kevin
>>> -- 
>>> Optimacy Communications, LLC
>>> http://www.optimacycomm.com
>>> _______________________________________________
>>> --Bandwidth and Colocation sponsored by Easynews.com --
>>>
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation sponsored by Easynews.com --
>>
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 




More information about the asterisk-users mailing list