[Asterisk-Users] Asterisk 1.2-rc1 and sip show inuse

[Mr. James W. Laferriere]

 	Hello Kevin ,

On Wed, 16 Nov 2005, Kevin Hanson wrote:
> Steven Ringwald wrote:
>> I apologize if this question has been asked before. Did something change 
>> with the behaviour of the 'sip show inuse' command between 1.0.9 and 
>> 1.2-rc1? I used to be able to see a list of extensions and the number of 
>> in/out calls. Now it just reports:
>> 
>> asterisk*CLI> sip show inuse
>> * User name               In use          Limit
>> * Peer name               In use          Limit
>> 
>> no matter how many calls are being used.
>> 
>> asterisk*CLI> sip show channels
>> Peer             User/ANR    Call ID      Seq (Tx/Rx)  Form  Hold     Last 
>> Message
>> 192.168.70.128   1234        339ad96826e  00102/00000  ulaw  No       Tx: 
>> ACK  192.168.70.116   1235        723e1612-52  00101/00002  ulaw  No 
>> Rx: ACK  2 active SIP channels
>> 
>> Any info about getting the previous functionality back would be greatly 
>> appreciated.
>> Steve
>> 
>> 
> I think you have to have call-limit set in sip.conf.  I had the same problem, 
> then set call-limit=10 and 'sip show inuse' worked.
 	Did that on a cvs pull ...
 	Asterisk CVS HEAD built by root at asterisk-1 on a i686 running Linux on 2005-10-31 23:09:39 UTC
 	I get the same response from 'inuse' as Steven does even with the
 	addition of the 'call-limit=' in sip.conf .
 	Any other suggestions ?  Tia ,  JimL
-- 
+------------------------------------------------------------------+
| James   W.   Laferriere | System    Techniques | Give me VMS     |
| Network        Engineer | 3542 Broken Yoke Dr. |  Give me Linux  |
| babydr at baby-dragons.com | Billings , MT. 59105 |   only  on  AXP |
+------------------------------------------------------------------+