[Asterisk-Users] A2billing problem.The system disconnects me immediatelly after asking me the PIN

Thu Nov 10 16:42:43 MST 2005

Hi,

i installed A2billing according to instructions. GUI works fine, i entered a 
new card and i put the appopriate context in my extensions.conf:

[callingcard]
exten => _123,1,Answer
exten => _123,2,Wait,2
exten => _123,3,DeadAGI,a2billing.php
exten => _123,4,Wait,2
exten => _123,5,Hangup

However when i enter the Calling card system, it did not ask my to put my 
account-code.  I found that in the a2billing.conf file there is a option for 
the intro_prompt which was empty. I put there the  prepaid-enter-card-num 
gsm file and now when i enter the calling card system i have the following 
behavior:

It asks me to enter the prepaid card number but immediatelly after it 
disconnects me with a message of "authentication failed - goodbye"...

Why the system does  not "wait" for the PIN number to be entered?

Any ideas?

Thank you,

Budoka.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++

My a2billing.conf is as follows:

; config file for the A2Billing Callingcard platform
; Global Database Setup

[database]
hostname=localhost
port=5432
user=a2billinguser
password=a2billing
dbname=mya2billing
;dbtype=postgres
dbtype=mysql

; configuration for the Web interface
[webui]

; Path to store the asterisk configuration files
buddyfilepath = /etc/asterisk/

; Email of the admin (not used yet)
email_admin = info at areski.net

; Card lenght
len_cardnumber = 4

; Voucher lenght
len_voucher = 5

;amount of MOH class you have created in musiconhold.conf : acc_1, acc_2... 
acc_10 class        etc...
num_musiconhold_class = 10

;MANAGER CONNECTION PARAMETERS
manager_host = localhost
manager_username = panos
manager_secret = panos123

; Allow to display the help section inside the admin interface  (YES - NO)
show_help="YES"

; Parameter of the upload
; PLEASE CHECK ALSO THE VALUE IN YOUR PHP.INI THE LIMIT IF 2MG BY DEFAULT
my_max_file_size_import = 512000
my_max_file_size = 512000       ; in bytes
; Not used yet, goal is to upload files and use them directly in the IVR
dir_store_audio = /var/lib/asterisk/sounds/a2billing

;Parameter of the upload
my_max_file_size_audio=3072000 ; in bytes

; the file type extensions allowed to be uploaded such as "gsm, mp3, wav" 
(separate by ,)
file_ext_allow = gsm, mp3, wav

; the file type extensions allowed to be uploaded for the musiconhold such 
as "gsm, mp3, wav" (separate by ,)
file_ext_allow_musiconhold = mp3

; ENABLE THE CDR VIEWER TO LINK ON THE MONITOR FILES (YES - NO)
link_audio_file = "NO"

; PATH TO LINK ON THE RECORDED MONITOR FILES
monitor_path = /var/spool/asterisk/monitor
// grant access to apache user on read mode for the directory :>  chmod 755 
/var/spool/asterisk/monitor/

; FORMAT OF THE RECORDED MONITOR FILE
monitor_formatfile = gsm

; Display the icon in the invoice
show_icon_invoice = "YES"

; Display the top frame (useful if you want to save space on your little 
tiny screen )
show_top_frame = "YES"

;base currency define the default currency that you want to use to setup 
your system (see the file /etc/asterisk/rates.inc to know the currency code)
base_currency = usd

; currency_choose allow you to great a set of currencies to let the customer 
select the most appropriate ("all" can be used)
currency_choose = usd, eur, cad, hkd

; configuration for the Reccurring process (cront)
[recprocess]
batch_log_file=/tmp/batch-a2billing.log

; configuration for the AGI, different configuration can be defined, ie 
"agi-conf1", "agi-conf2", etc...
; the groupid parameter will define which process_sections to use. Usage : 
DeadAGI(a2billing.php|%groupid%)
; by default agi-conf1 is used
[agi-conf1]

; the debug level
; 0=none, 1=low, 2=normal, 3=all
debug=3

; Active the logging of the application
; logging is optimized to write all the logs at once :D
logger_enable=YES

; File to log
log_file=/tmp/a2billing.log

; if YES Use Set(LANGUAGE()=fr) instead, for me it didnt work from AGI
; ### if (SETLANGUAGE_DEPRECATE==YES)   $myres = $agi->agi_exec("EXEC 
Set('LANGUAGE()=$language')");
setlanguage_deprecate=YES

; play the goodbye message when the user finish
say_goodbye=YES

; enable the menu to choose the language
; press 1 for English, pulsa 2 para el espaÃ±ol, Pressez 3 pour FranÃ§ais
play_menulanguage=NO

; force the use of a language, if you dont want to use it leave the option 
empty
; Values : ES, EN, FR, etc... (according to the audio you have install)
force_language=EN

; Introduction prompt : to specify an additional prompt to play at the 
beginning of the application
; parlezplus-intro_013centimes
intro_prompt=prepaid-enter-card-num

; lenght of the cardnumber (amount of digits)
len_cardnumber=4
; Voucher lenght
len_voucher = 5

; this is the minimum amount of credit to use the application
min_credit_2call=1

; if YES it will catch the DNID and try to dial it out directly without 
asking for the phonenumber to call
; value : YES, NO
use_dnid=NO

; list the dnid on which you want to avoid the use of the previous option 
"use_dnid"
;no_auth_dnid=2400,2300

;number of time the user can dial different number
number_try=3

; Play the balance to the user after the authentication (values : yes - no)
say_balance_after_auth=YES

; Play the balance to the user after the call (values : yes - no)
say_balance_after_call=NO

; Play the time the user can call (values : yes - no)
say_timetocall=YES

; enable the callerid authentication
; if this option is active the CC system will check the CID of caller
cid_enable=NO

; if the cid doesnt exist you can then ask a cardnumber to the calling party 
in order to authenticate the caller
cid_askpincode_ifnot_callerid=YES

; if the callerID, this option will allow the system to add it automatically 
and create a cardnumber to hook them up.
cid_auto_create_card=NO

; If cid_auto_create_card has been set to YES, the following option will 
define with which parameters the card will be create
;
; billing type of the new card
; ( value : POSTPAY or PREPAY)
cid_auto_create_card_typepaid=POSTPAY
; amount of credit of the new card
cid_auto_create_card_credit=0

; if postpay define here the credit limit for the card
cid_auto_create_card_credit_limit=1000

; the tariffgroup to use for the new card (this is the ID that you can find 
on the admin web interface)
cid_auto_create_card_tariffgroup=6

; enable the option to call sip/iax friend for free (values : YES - NO)
sip_iax_friends=NO

; if SIP_IAX_FRIENDS is active, you define a prefix for the dialed 
phonenumber to call directly a pstn number
; values : number
sip_iax_pstn_direct_call_prefix=9

; this will enable a prompt to enter your destination number_try
; if number start by sip_iax_pstn_direct_call_prefix we do directly a sip 
iax call, if not we do a normal call
sip_iax_pstn_direct_call=NO

; More information about the Dial : 
http://voip-info.org/wiki-Asterisk+cmd+dial
; 30 :  The timeout parameter is optional. If not specifed, the Dial command 
will wait indefinitely, exiting only when the originating channel hangs up, 
or all the dialed channels return a busy or error condition. Otherwise it 
specifies a maximum time, in seconds, that the Dial command is to wait for a 
channel to answer.
;   H: Allow the caller to hang up by dialing *
;   r: Generate a ringing tone for the calling party
;   m: Provide Music on Hold to the calling party until the called channel 
answers.
;       L(x[:y][:z]): Limit the call to 'x' ms, warning when 'y' ms are 
left, repeated every 'z' ms)
;                                 %timeout% tag is replaced by the 
calculated timeout according the credit & destination rate!

dialcommand_param="|30|HL(%timeout%:61000:30000)"

; by default (3600000 = 1HOUR MAX CALL)
dialcommand_param_sipiax_friend="|30|HL(3600000:61000:30000)"

; Define the order to make the outbound call
; YES -> SIP/dialedphonenumber at gateway_ip - NO  
SIP/gateway_ip/dialedphonenumber
; Both should work exactly the same but i experimented one case when gateway 
was supporting dialedphonenumber at gateway_ip
; So in case of troubles, try it out
switchdialcommand=NO
; enable to monitor the call (to record all the conversation)
; value : YES - NO
record_call=NO

; format of the recorded monitor file
monitor_formatfile=gsm

;base currency define the default currency that you want to use to setup 
your system (see the file /etc/asterisk/rates.inc to know the currency code)
base_currency = usd

; Force to play the balance to the caller in a predefined currency, to use 
the currency set for by the customer leave this field empty
agi_force_currency =

; CURRENCY SECTION
; Define all the audio (without extension) that you want to play according 
to currency (use , to separate, ie 
"usd:prepaid-dollar,mxn:pesos,eur:Euro,all:credit")
currency_association = usd:prepaid-dollar,mxn:pesos,eur:euro,all:credit

; Please enter here the file you want to play when we prompt the calling 
party to enter his destination number
; file_conf_enter_destination = prepaid-enter-number-u-calling-1-or-011
file_conf_enter_destination = prepaid-enter-dest

; Please enter here the file you want to play when we prompt the calling 
party to choose the prefered language
; file_conf_enter_menulang = prepaid-menulang
file_conf_enter_menulang = prepaid-menulang2

; the debug shell (ONLY FOR THE DEVELOPERS)
; 0=no, 1=yes
debugshell=0

_________________________________________________________________
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.com/