[Asterisk-Users] Zaptel T1 Timing Source

[Waldo Rubinstein]

Thanks. Got it.

- Waldo

On Nov 9, 2005, at 1:13 PM, Don Pobanz wrote:

> Waldo Rubinstein wrote:
>> span=1,1,0,esf,b8zs
>> e&m=1-24
>> span=2,1,0,esf,b8zs
>> e&m=25-48
>> span=3,2,0,esf,b8zs
>> e&m=49-72
>> span=4,2,0,esf,b8zs
>> e&m=73-96
>
> You are misunderstanding the span provisioning. There is ONE clock  
> in the TE410P card. This clock can either free run or get it's  
> timing (sync) from one of the T1's. If the specified T1 is not  
> available it can be told to look at a second t1 or third or fourth.  
> If span 1 is the carrier with the timing source, try setting it up  
> like this.
>
>  span=1,1,0,esf,b8zs
>  e&m=1-24
>
>  span=2,2,0,esf,b8zs
>  e&m=25-48
>
>  span=3,3,0,esf,b8zs
>  e&m=49-72
>
>  span=4,4,0,esf,b8zs
>  e&m=73-96
>
> This says use the timing from span 1 if span 1 is up, span 2 if  
> span 1 is down, span 3 if span 1 & 2 are down, span 4 if spans  
> 1,2,3 are down.
>
> Don Pobanz
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users