[Asterisk-Users] TDM400 FXO vs FXS Interrupt performance

[Gary Eck]

I have popping with FSO modules only on channel 1 - the other 3 channels
are clear.
Moved slots, there are no shared interrupts, replaced the TDM400 card
and all modules - still the same result.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dustin
Goodwin
Sent: Saturday, November 05, 2005 4:01 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] TDM400 FXO vs FXS Interrupt performance


I have read a lot online about interrupt related cracking/popping noise 
issues on Digium cards. The weird thing is I experience it with the FXO 
port on my TDM card but not on the FXS. Does this make any sense? I had 
assumed an interrupt problem. But if the FXS port is working why would 
the FXO port be having a problem?

- Dustin -
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users