[Asterisk-Users] How to bridge fax from pri to fxs

Kevin Hanson tuxpert at comcast.net
Wed Nov 2 22:56:32 MST 2005


Andrew Kohlsmith wrote:

>On Wednesday 02 November 2005 11:17, Kevin Hanson wrote:
>  
>
>>I have a TE110P and a TDM10B.  Via DID, I want to route calls to the fax
>>number to the fxs port to which the fax machine will be connected.
>>    
>>
>
>  
>
>>Do I need to set "faxdetect=both" in zapata.conf?
>>    
>>
>
>  
>
>>I am assuming that Asterisk will bridge between the two cards and that
>>the usual fax over IP won't be a factor.
>>    
>>
>
>the 'faxdetect' parameter does one thing and one thing only: when a fax tone 
>is heard, Asterisk will jump to the 'fax' extension in the channel's context.  
>If you are using a specific DID for faxes you don't need that at all.
>
>exten => 1234567,1,Dial(Zap/g2,,g)
>exten => 1234567,2,Macro(handle-hangup)
>
>is how I'd do it.
>
>I'd define your PRI channels in group 1, and your FXS ports that the fax 
>machine(s) are hooked up to in group 2.  If you only want one fxs port for 
>one fax machine, then say Dial(Zap/25) or whatever zapata port the fxs 
>machine's on.
>
>Works like a charm for me, anyway.
>
>-A.
>_______________________________________________
>  
>
Thanks for your help.  Tried it out tonight.  Works great...sending and 
receiving.

Cheers,
Kevin



More information about the asterisk-users mailing list