[Asterisk-Users] Sipura 3000 - fax passthrough?

[pbx at itsngroup.com]

I'm not sure if the Sipura3k allows for that. Somewhere along the line,
the line has to be answered...

and if you have the same codec allow= in your sip.conf for both
extensions, * wont transcode the stream, it would do a passthru.

I have the reverse as well, i have the fax machine do the dialplan through
asterisk, however the context for the fax only sends it back out the
sipura3k box Dial(SIP/192.168.1.254:5061/blahblah)

And it allows for CDR.

if the internal fax machine is busy on an incoming fax call, then i go to
rxfax as a backup.

Ben

> But that requires asterisk handles the call, it has to be g711 encoded,
> and
> all of that mess. What I want is a fax call is directly passed through to
> the fax machine, and voice is send to Asterisk via VOIP.
>
> Chris Mason
> www.anguillaguide.com
> Tel:  (305) 704-7249 Fax: (815)301-9759
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>> pbx at itsngroup.com
>> Sent: Tuesday, May 31, 2005 6:16 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] Sipura 3000 - fax passthrough?
>>
>> What do you want to do if they aren't fax's? dial a DID or something?
>>
>> I have the similar thing... I have both ports. the FXO, and
>> FXS registering with my asterisk server..
>>
>> Then, the default dialplan is <S0:123456789>
>>
>> so it will dial immediately 123456789 in my extensions.conf
>>
>> 123456789 answers the line
>> and then it runs NVFaxDectect from newman telecom, and if
>> it's a fax, it jumps to the fax priority and i then dial
>> ${FAX} where FAX=SIP/<exten of
>> fax>
>>
>> and walla, the fax machine answers and all is well.
>>
>>
>>
>> > I have installed two Sipura 3000's on my office pbx as a test, they
>> > work well an have some great features including fax detect,
>> but I was
>> > hoping to allow incoming faxes on the FXO port to be detected and
>> > passed through to the FXS port. Am I mistaken or does this
>> work, and how?
>> >
>> > Chris Mason
>> > Anguilla
>> >
>> > _______________________________________________
>> > Asterisk-Users mailing list
>> > Asterisk-Users at lists.digium.com
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> > To UNSUBSCRIBE or update options visit:
>> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>