[Asterisk-Users] Where to start to solve hardware problem?

[Bill Ford]

It liiks like a motherboard problem. It's failing the initial boot.
You say it booted again after two hours. Was the machine powered down
during that interval. If so, I suspect you have a temperature problem.
I've seen very similar problems from a defective CPU fan.

Bill

On 5/30/05, Ronald Wiplinger <ronald at elmit.com> wrote:
> Yesterday my * server (SuSE 9.2 pro on Athlon) just stopped, no screen,
> no reaction to keyboard or mouse.
> 
> I get all kind of messages, or just stop during restart
> 
> 1. just two lines of a code (immediately after turn on the computer)
> 113-AM21200-100-GB
> GV-RX30128D F1
> 
> 
> 2. Main Processor: AMD Athlon (tm) 64 Processor 3200+
> <CPUID: 0FF0 Patch ID: 0041>
> 
> and BIOS line
> 12/14/2004-NF-CK804-6A6IFG09C-00
> and it stops here
> 
> 
> 3. No SATRaid found and it stops here
> 
> 
> 4. ... No disk reserved for RAID use, RAID disable
> (actually it meant computer disabled, and it stops here)
> 
> 5. if I come to boot Linux, than it stops somewhere, with or without
> kernel panic.
> 
> The most I came was:
> Excessive leakage detected on module 0:0 volts (00) after 162 ms
> ProSLIC module failed leakage test. Check for short circuit
> DC-DC cal has a surprising direct 107 of 0xff!
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> !!!!!!! DTMF_ROW_0_PEAK iREG 0 = FFFF should be 55C2
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> !!!!!!! DTMF_ROW_1_PEAK iREG 1 = FFFF should be 51E6
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> !!!!!!! DTMF_ROW_2_PEAK iREG 2 = FFFF should be 4B85
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> !!!!!!! DTMF_ROW_3_PEAK iREG 3 = FFFF should be 4937
> ##### Loop error (ff) #####
> ##### Loop error (ff) #####
> !!!!!!! DTMF_ROW_1_PEAK iREG 4 = FFFF should be 3333
> CPU 0: Machine Check Exception:       4 Bank 4: b20000000000000070f0f
> TSC 1cd4adfa6b
> 
> Kernel panic - not syncing: Machine check
> 
> Above error I googled as a problem in the Digium card. Chicken or egg?
> Digium card or a result of another problem? Since I most of the time did
> not come so far.
> 
> Any idea?
> 
> I can immagine from all the errors I saw:
> 1. Motherboard is broken
> 2. CPU is broken
> 3. Power supply is broken (btw a very expensive one:  200 US$)
> 
> What is your expert opinion??? Where and how to start to get back the
> system stabled. Yes, after 2 hours it booted again, but I worry, that it
> will happen anytime again.
> 
> 
> 
> bye
> 
> Ronald
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>