[Asterisk-Users] Red Alarm TE110P

[Peter Svensson]

On Tue, 24 May 2005, Remco Barende wrote:

> I'm trying to setup a Wildcard TE110P with a PRI in The Netherlands.
> 
> I get a Red Alarm on the line.
> 
> Is there any way of debugging this? I've tried some configs that should 
> work but without success. Is there any way of telling if the cabling is 
> correct or what else the problem could be?

Have you configured the card to E1 and not T1? Red alarm is usually a loss 
of carrier (or close enough most of the time). I.e. you are not seeing 
incoming signals from the remote end.

Check thatthe card is set to E1, check the cabling and check that the 
remote end is up.

Peter