[Asterisk-Users] E&M Tie Line

[David Sampson]

I am connecting to an eON Millenium if anyone has done this.

 

Dave

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matt
Loretitsch
Sent: Monday, May 23, 2005 4:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] E&M Tie Line

 

/etc/zapata.conf


span=1,1,0,esf,b8zs    (adjust to suit your t1 framing and encoding)
e&m=1-24

 

/etc/asterisk/zaptel.conf

 

[channels]
echocancel=yes
echotraining=400
context=default
signalling=featd  (this send *ani*dnis* to my PBX, otherwise use 'em_w'
for this parameter
callerid=asreceived
musiconhold=default
group=1
channel=>1-24

 

Are you hooking up to a Definity by chance?  I can send those configs
too if you need em'  Pretty easy actually.  I couldn't do a PRI tie line
because I'm out of processor channels on the Avaya side.  Bummer!  Good
luck!

-Matt


 

	-----Original Message-----
	From: David Sampson [mailto:dsampson at innseason.com] 
	Sent: Monday, May 23, 2005 3:16 PM
	To: Asterisk Users Mailing List - Non-Commercial Discussion
	Subject: [Asterisk-Users] E&M Tie Line

	How do I setup my T1 card as an E&M tie line?  Any special
configuration?

	 

	 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050523/9a94f4b7/attachment.htm