[Asterisk-Users] sip to sip

[Brian C. Fertig]

If your looking to link 2 asterisk boxes might I suggest IAX.  Much more
efficient in the way bandwidth

is utilized between the locations.  Also if you want to use your sip
solution, have you setup the other

end point in your SIP.CONF?   I have never got IP dialing to work in
asterisk but it works fine when

assigned in the conf file.

 

 

 

.o-------------------------------------------------------o.

Brian Fertig

NOC/Network Engineer

Systems Engineer

 

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Quintin
Sent: Monday, 23 May, 2005 08:08
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] sip to sip 

 

Hi 

 

I'm trying to put up an sip pbx system for my company but i'm getting
some problems when I'm trying to call from server ( branch A ) to server
( branch B )...

 

This is my extentions.conf :

 

exten => 3003,1,Dial,SIP/3003 at 192.168.0.200

 

________________________________________________________

 

 

And this is what I get when I try to dial that user in branch B

 

_________________________________________________________

 

    -- Executing Dial("SIP/5001-66b1", "SIP/3003 at 192.168.0.200") in new
stack

    -- Called 3003 at 192.168.0.200

    -- Got SIP response 404 "Not Found" back from 192.168.0.200

    -- SIP/192.168.0.200-e638 is circuit-busy

  == Everyone is busy/congested at this time (1:0/1/0)

  == Auto fallthrough, channel 'SIP/5001-66b1' status is 'CONGESTION'

 

Both servers are exactly the same..... 

 

What can the problem be, that branch B server doesn't route the call
through

 

Thx

Quintin



This email was scanned by:  Mcafee GroupShield
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050523/b851524c/attachment.htm