[Asterisk-Users] MeetMe -1 return Code - howto

[pbx at itsngroup.com]

I was searching for help on how to handle the errors that are returned
from the MeetMe application.

for instance.

1) if a user tries to join a conference that is locked, allison says that
the conference is locked and then comes back to the dialplan, however it
does not continue down the dialplan.

I have a meetme command on Priority 8, and the CLI says that it returned
non zero (as the wiki states it would be -1).

I tried to use 109 priority thinking it is 101+n, but i cannot have it go
back in time to priority 7, becaue it would just loop.

How does one handle this?

When i'm in a conference, and I press the pound key, it does exit out
nicely and continue down the dialplan, i have some NoOp on the next
priority after the MeetMe command and it flows nicely from there.

   -- Accepting a maximum of 4 digits.
    -- Playing 'conf-getconfno' (language 'en')
    -- User entered '1234'
    -- Executing NoOp("SIP/2001-e4e7", "user entered conf no: 1234")
    -- Executing MeetMe("SIP/2001-e4e7", "1234|p")
    -- Playing 'conf-locked' (language 'en')
  == Spawn extension (ivr-join-conf, s, 8) exited non-zero on 'SIP/2001-e4e7'

I also get the error if they enter a conf # that is not configured.
Allison says that that is an invalid conference number, please try again,
and the same error:

    -- Accepting a maximum of 4 digits.
    -- Playing 'conf-getconfno' (language 'en')
    -- User entered '5678'
    -- Executing NoOp("IAX2/4000 at 192.168.1.141:4569-4", "user entered conf
no: 5678")
    -- Executing MeetMe("IAX2/4000 at 192.168.1.141:4569-4", "5678|p")
  == Parsing '/etc/asterisk/meetme.conf': Found
    -- Playing 'conf-invalid' (language 'en')
  == Spawn extension (ivr-join-conf, s, 8) exited non-zero on
'IAX2/4000 at 192.168.1.141:4569-4'
    -- Hungup 'IAX2/4000 at 192.168.1.141:4569-4'


However my dialplan has an 8 and a 109 priority both are NoOp.. and they
are never triggered.

Thanks for some help on this in advance...