[Asterisk-Users] Integrating Asterisk into our Legacy PBX <-- Newb (correction)

[Geoff Manning]

Correction:

The hardware is a Wildcard T100P (not a TE110P)

Thanks!

> -----Original Message-----
> From: Geoff Manning [mailto:gmanning at zoom.com]
> Sent: Wednesday, May 18, 2005 9:07 AM
> To: Asterisk Users (E-mail)
> Subject: [Asterisk-Users] Integrating Asterisk into our Legacy PBX
> <--Newb
> 
> 
> I have been successful in setting up asterisk and making 
> workstation to
> workstation SIP calls. But I am lost when it comes to 
> anything past that.
> 
> We are trying to integrate this asterisk server into with our 
> Executone
> (432?) PBX to allow us to make outbound SIP calls between our 
> disparate
> locations.
> 
> We have a T1 card in our PBX, and the Digium TE110P card in 
> the Asterisk. We
> have the T1 card connected to a CSU and the CSU going into 
> the TE110P. And
> the Asterisk server connected to the WAN.
> 
> We get dial tone from the T1 card but that's as far as I get! 
> Where do I
> begin?
> 
> Thanks in advance!!
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>