[Asterisk-Users] zaphfc troubles

[Nicolas Olivier]

Quoting from:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20Zaptel%20Installation
As I haven't got a Digium card, I need a timer which can be provided by ztdummy, zaprtc or zaprai.

But anyway the results are the same with or without zaprtc loaded.

Peer Oliver Schmidt wrote:
> Nicolas Olivier wrote:
> 
>> I'm trying to setup a small BRI ISDN <-> voip gateway.
>> The ISDN card is based on Cologne chipset, so I try set it up with
> zaphfc.
>>
>> The versions i'm running:
>> kernel-2.4.27
>> Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e
>> zaptel modules 1.0.7
>> zaphfc is from bristuff-0.2.0-RC8e
>>
>> When I'm doing the insmod on zaptel, zaphfc, zaprtc:
>>
>> Zapata Telephony Interface Registered on major 196
>> PCI: Found IRQ 12 for device 00:12.0
>> zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc3840000 fifo
> 0xc2d58000(0x2d58000) IRQ 12 HZ 100
>> zaphfc: Card 0 configured for TE mode
>> Registered Span 1 ('ZTHFC1') with 3 channels
>> Span ('ZTHFC1') is new master
>> zaphfc: 1 hfc-pci card(s) in this box.
>> Registered Span 2 ('ZTRTC/1') with 0 channels
>> Real Time Clock Driver v1.10e
>>
>> I'm using zaprtc as the gateway is running on a VIA motherboard
> without USB controller.
> [..]
> 
> Why are you running zaprtc? zaphfc provides your needed timing source.
> -- 
> Best regards
> 
> Peer Oliver Schmidt
> PGP Key ID: 0x83E1C2EA
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>