[Asterisk-Users] voipjet anyone?

[Kerry Garrison]

I had the same problem, there were a couple problems, mostly with my
dialplan:

AAH 1.0 Config
Trunk Settings

Trunk Name: voipjet
Outbound Caller ID: "Tech Data Pros" <9495027819>
Maximum Channels: 4
Dial Rules: 1949+NXXXXXX ; you need to add local area code

Outgoing Settings:

Trunkname: voipjet
PEER Details:
allow= ulaw
auth=md5
context=to-voipjet
disallow=all
host=69.25.60.30
notransfer=yes
secret= mysecret
type=peer
username=myuserid

Outbound Routing Settings

Route Name: FWDOUT
Dial Patterns: 393|.

Note: for toll free add the following (You will need to dial * before the
toll free number:

*1800NXXXXXX
*1888NXXXXXX
*1877NXXXXXX
*1866NXXXXXX
 
Trunk Sequence: 0 IAX2/fwd

Save all your settings, click on red bar to apply, wait 5-10 seconds
depending on the speed of your machine. Dial 393612 for current time and
393613 for an echo test.

Kerry Garrison
http://geekgazette.com - http://techdatapros.com IT/VoIP Consultants



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley Siler
Sent: Friday, May 13, 2005 8:49 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] voipjet anyone?

You are completely correct.

I see by the called number that the user is in Phoenix?  I am too.

Call me at 4804230118 ext. 1003 if you want some off list assistance with
this.
I have mine running just fine with AAH 0.09.

Thanks,
Wiley



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rich Adamson
Sent: Friday, May 13, 2005 9:24 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] voipjet anyone?

Look a little closer...
WARNING[2442]: Call rejected by 66.246.220.19: No such context/extension

that certainly does not imply an incorrect codec!

------------------------
> Almost positive iLBC is not allowed....  Use uLaw...
> 
> This is directly form the install instructions...
> 
> Step 3A (recommended): Set your codec to G.711 ulaw for optimal sound 
> clarity and minimal transmission delay. In iax.conf (found in
> /etc/asterisk) locate the codec section and include the following
only. 
> 
> disallow=all ; Prevent all codecs... 
> allow = ulaw ; ...except G.711 ulaw
> 
> 
> W
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin 
> Bockman
> Sent: Thursday, May 12, 2005 10:52 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] voipjet anyone?
> 
> > >>May 12 22:27:05 VERBOSE[2442]: -- Executing 
> > >>Dial("SIP/101-ad89",
> > >>"IAX2/voipjet/4803442640") in new stack May 12
> > >>22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12
> > >>22:27:05
> 
> > >>WARNING[2442]: Call rejected by 66.246.220.19: No such 
> > >>context/extension
> > >
> > >The number needs to be 10 digits.  Add a 1 in front.
> 
> > Tried that, doesnt seem to matter.
> 
> Hmm.. did you do an extensions reload?  If so, then it should give you

> a different error.  Show us.
> 
> My iax.conf:
> [voipjet]
> type=peer
> ;host=216.118.117.46 primary east
> host=69.25.60.30
> username=<username>
> secret=<pass md5>
> auth=md5
> context=default
> disallow=all
> allow=ilbc
> jitterbuffer=yes
> dropcount=1
> 
> extensions.conf:
> exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwW
> 
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

---------------End of Original Message-----------------


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users