[Asterisk-Users] Problem with MeetMe

[Daniel Salama]

I have a feeling it has something to do with that as well. I would  
really hate to having to install a digium card just for the timer  
source. As I just posted on a earlier email, I even tried building  
zaprtc but could not succeed. I think it may have something to do  
with the fact that my stock kernel has RTC support built in. At the  
same time, I'd rather stay away from building custom kernels.

Any other suggestions?

Thanks,
Daniel

On May 11, 2005, at 3:30 PM, John Dunham wrote:

> I believe it has to do with the fact that you may not have a Digum  
> card in
> your * server.  It uses it for timing.  We have several * boxes and  
> only one
> of them has the Digum card and therefore is where the conference  
> rooms all
> go to. We use IAX between the boxes and works across that  
> connection, but
> the destination has to be on the unit with the Digium card.
>
> John Dunham
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Daniel
> Salama
> Sent: Wednesday, May 11, 2005 1:09 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Problem with MeetMe
>
>
> I'm trying to configure some meet me rooms in asterisk 1.0.2 and I'm
> getting the following problem:
>
>      -- Executing MeetMe("SIP/3210-38a9", "0224|qM") in new stack
>    == Parsing '/etc/asterisk/meetme.conf': Found
> May 11 14:05:46 WARNING[20050]: chan_zap.c:757 zt_open: Unable to
> open '/dev/zap/pseudo': No such device or address
> May 11 14:05:46 ERROR[20050]: chan_zap.c:6687 chandup: Unable to dup
> channel: No such device or address
> May 11 14:05:46 WARNING[20050]: app_meetme.c:227 build_conf: Unable
> to open pseudo channel - trying device
> May 11 14:05:46 WARNING[20050]: app_meetme.c:230 build_conf: Unable
> to open pseudo device
>      -- Playing 'conf-invalid' (language 'en')
>
> I have the following in meetme.conf
> [rooms]
> conf => 0224
>
> What could be happening? I don't have any digium cards on the
> machine. lsmod shows:
> Module                  Size  Used by    Not tainted
> zaptel                182080   0
>
> The other modules are not related to zaptel or asterisk.
>
> ls -l /dev/zap/ps* shows:
> crw-r--r--    1 root     root     196, 255 May 11 10:07 /dev/zap/ 
> pseudo
>
> Any ideas?
>
> Thanks,
> Daniel
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>