[Asterisk-Users] Sipura 841 and headset

[Eric Wieling aka ManxPower]

George Pajari wrote:
> 
>> I bought two sipura 841 phones.  I used to have GN Netcom headset 
>> which I connect instead of the handset.  The problem is that I don't 
>> have any sound coming out the headset and I can't speak neither !
>>  
>> I'am located in France and I was wondering if the cabling in the 
>> sipura and in the headset is the same (I mean the order of the cables) 
>> or maybe is there something else to do ?
> 
> 
> Handset wiring IS non-standard which is why most headset devices have a 
> set of configuration switches or dials to adapt the unit to different 
> phones. My Netcom headset (8120) has a little wheel on the base unit 
> which one rotates until one get audio in both directions.
> 
> Would it be too obvious to suggest visiting GN's website for 
> configuration information on your specific model?
> 

I suspect that only applies to headsets using RJ21 or whatever the 
little RJ connector is called and not to 2.5mm headsets.

-- 
Eric Wieling * BTEL Consulting * 504-210-3699 x2120