[Asterisk-Users] 7777 (simulate incoming call) not working

Gregory Wiktor - ADCom Corp. gw at adcomcorp.com
Fri May 6 09:42:34 MST 2005


Either its suspending or APM, or watchdog... Check your hardware...

Greg 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
asterisk at txpe.net
Sent: Friday, May 06, 2005 10:43 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] 7777 (simulate incoming call) not working

I don't know if this is related, but the last two mornings I've come in,
the newer AAH 1.0 computer has been locked-up.  The Caps Lock and Scroll
Lock lights on the keyboard are flashing (apparently in a specific
pattern).  The computer is a HP 7960 w/ ASUS mobo, P4, 1.3Ghz, 256MB
RDram.  Not being a Linux person, I don't know if this is a Linux issue
and/or a hardware issue.  Is there a specific log I can look at that
might tell me what happened?

Thanks,
Doug

At 03:19 PM 5/5/2005, you wrote:
>I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box.  Though on 
>the new box, I've installed a generic ebay X100P.  I don't have my 
>livevoip or voicepulse accounts set up yet on the new box (can both 
>boxes be registered at the same time?).  I've set up one IP phone 
>(SPA841) with the new box.  I have my SBC POTS line plugged into the 
>fxo card.  I set up everything in AMP.  I can make out going calls.  
>The problem I'm having now is the digital receptionist greeting (aa_1).

>If I set it to automatically forward to an extension it works.  But, if

>I have it play a message (press 200 for Joe, etc), you can't here the 
>message at all.  I can dial the extension number and * will accept and 
>forward me to that extension.  I can see on the CLI that it is suppose 
>to be playing the message.  If I dial 7777 (simulate incoming call), I 
>get the same thing, can't hear voice but can dial extensions.
>
>I've adjusted the txgain and rxgain in zapata.  This only increased 
>echo.  I have googled this list and SF, I can't find anything else to 
>try yet, or I'm using the wrong search terms.
>
>Probably unrelated, but when I "stop gracefully" and then restart *, I 
>get the following error:
>[app_zapbarge.so] => (Barge in on Zap channel application)
>   == Registered application 'ZapBarge'
>  [app_zapscan.so] => (Scan Zap channels application)
>   == Registered application 'ZapScan'
>  [app_rxfax.so][root at asterisk1 root]# Ouch ... error while writing 
>audio
> data: : Broken pipe
>
>The only thing I can do at this point is reboot the machine.  I don't 
>see any failures on the boot up.  My search for this error appears to 
>be related to mpg123.  But, I never found where somebody had a solution
for it.
>
>I have tried to install fax capability (install-pdf), but that doesn't 
>work either.  I get this error:
>
>There is a pretty long delay after the "Server: CentOS-3 - Addons" line
>
>Thanks,
>Doug

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list