[Asterisk-Users] Site to Site Gateway

[wells zheng]

This is possible . my question is that you dial the extension # to the
PBX , the extension #  change.

Wells.

On 3/15/05, Michael Sanders <Michael.Sanders at titanit.co.za> wrote:
> Hi,
>  
> Ive been searching the lists and cant find the exact solution I need using
> *. I need to route voice channels between two sites across cisco
> routers.Both PBX's are analog only (no Digital upgrade path). 
>  
> I was thinking for the Gateways at each site.Have 2 FXS/FXO in each
> gateway.Two ports can be connected to the PABX incoming tie lines and two
> connected to extensions.LCR can be programmed into the PBX to pick up one of
> the two tie lines and this will give you a extension of the remote pbx.
>  
> First of all is this solution possible?
>  
> What will be the overall bandwidth (with IP overhead and all that stuff) per
> two way channel using G.729.?
>  
> Will * open the channel and keep it open even if no call is taking place?
>  
> Thanks in advance.
>  
> Michael
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>  
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>