[Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?

[David John Walsh]

what sort of level of PC is required for 300 concurrent calls?

Regards
David

On 5/1/05, Hakem Taourchi <ht at phonitel.com> wrote:
>  
>  
> 
> Can this Dell run 90 calls simultaneously ? Or need a higher Dell machine? 
> 
>   
> 
>   
> 
> -----Message d'origine-----
>  De : asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] De la part
> de Ariel Batista
>  Envoyé : samedi 23 avril 2005 1:27
>  À : 'Ben Hencke'; 'Asterisk Users Mailing List - Non-Commercial Discussion'
>  Objet : RE: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?
>  
> 
>   
> 
> I just setup a SC420 with two TDMO4b cards in it and it works just fine. No
> problems what so ever with it so far. 
> 
>   
>  
>  ________________________________
>  
> 
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf
> Of Ben Hencke
>  Sent: Friday, April 22, 2005 6:42 PM
>  To: Asterisk Users Mailing List - Non-Commercial Discussion
>  Subject: Re: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P? 
> 
>   
> 
> I have head that the SC prefixed Dells are not good to use with Digium
> hardware. Considering how picky my TE405P cards were in other low end Dell
> servers, I would suggest using an 1850 instead.
>  
>  OTOH, if it does work, please let me know :-)
>  If you go to small biz, you can get the SC1425 trimmed down with dual
> 2.8hgz for under $1k
>  - Ben 
>  
> 
> On 4/22/05, Greg Boehnlein <damin at nacs.net> wrote: 
> 
> Hello,
>          I've been asked to build a couple of Gateway servers for a client
>  w/ TE405P hardware, and have been looking around at various 1U options.
>  I've been looking at SuperMicro and Tyan barbones boxes as possible 
>  platforms, but then was directed to Dell's SC1425 by a friend. Short
>  story, is that you can purchase a 2x3.0Ghz/1GigDDR400/1xSATA box in a 1U
>  form factor for $1,498.00. This seems almost too good to be true, so I'm 
>  asking if anyone has had any experience with this box?
>  
>  I'm not up on my PCI terminology, but as I understand it, the TE405P can
>  only be used in a 32 bit 33Mhz slot at 5.0 Volts. This SC1425 lists a
>  "1x 64-bit/1xxMHz PCI-X slot" under it's expandability information. I'd 
>  venture to guess this is probably NOT going to work with a TE405P.
>  
>  That being said, if it works, great. If not, what 1U boxes are people
>  using IN PRODUCTION w/ TE405P cards?
>  
>  --
>      Vice President of N2Net, a New Age Consulting Service, Inc. Company 
>           http://www.n2net.net Where everything clicks into place!
>                               KP-216-121-ST
>  
>  _______________________________________________
>  Asterisk-Users mailing list
>  Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>  To UNSUBSCRIBE or update options visit:
>    
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>   
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>