[Asterisk-Users] Problems editing oh323 configuration parameters

[Yves]

Did you copy the oh323.conf file from the asterisk-oh323 package ?
Could you show what it looks like ?
Are the file permissions ok ?

Yves

Cenk Yabas wrote:
> Checking the oh323 configuration on asterisk console gives the following
> result below. I'm editing the /etc/asterisk/oh323.conf file to correct the
> parameters, but the result doesn't change. I didn't receive any error
> massages during the installation of asterisk-oh323-0.7.1 channel driver. So
> what might be wrong?
>  
> localhost*CLI> oh323 show conf
> localhost*CLI>
>  Configuration of OpenH323 channel driver
> ------------------------------------------
> Version: 0.7.1
> Listening on address: :1720
> Gatekeeper used:  Failed
> FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF
> Supported formats in pref. order:
> Jitter buffer limits (min/max): 20-100 ms
> TCP port range: 5000 - 31000
> UDP (RAS) port range: 5000 - 31000
> UDP (RTP) port range: 10000 - 20000
> IP Type-of-Service value: 0
> User input mode: 2
> Max number of inbound H.323 calls: 0
> Max number of outbound H.323 calls: 0
> Max number of simultaneous H.323 calls: -1
> Max call rate (ingress direction): 999999.00/30
>  
> Thanks in advance for any help,
> Cenk Yabas.
> 
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users