[Asterisk-Users] SPA-841 Call waiting?

[Darren Wright]

I was the one who originally asked the question......upgrading to @home
.7 fixed it for me.  I hadn't dug into the dialplan, but all is well
now.


Too bad it was all for naught.  The SPA-841 speakerphone sucks ROYALLY.

-Darren
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Clark
Sent: Wednesday, March 30, 2005 4:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SPA-841 Call waiting?

Paul Dugas wrote:
> On Wed, March 30, 2005 4:22 pm, Steve Clark said:
> 
>>I'll go thru the config one more time if it still doesn't work I'll 
>>then try having it register with asterisk not that I can see where 
>>that should make a difference.
> 
> 
> Huh?  Then what are you registering with?  My 841 basically does 
> nothing until after it registers with the server.  Perhaps I'm missing

> something here...
> 
There is an option under admin->ext that you can set to allow making
calls with out reg. and ans calls without reg.

But I just changed it to register and have the gotten the same results.
I call form phone a thru asterisk to the phone B and answer it. I then
use  phone C to
  call phone B and I get a sip 486 busy here and asterisk goes into vm.

I have on admin->phone page both ext set to 1. I have admin->ext1
enabled and registering with asterisk. I have admin->ext2 disabled. I
get both lines active and can call out from either one.

Steve
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users