[Asterisk-Users] Remove a channel from receiving inbound calls

[Seth Remington]

On Mon, 2005-03-28 at 12:02 -0500, Bob Sowers wrote:
> I’ve got a small office setup with a TDM400 and 3 FXO cards.  I’d like
> to take away the ability of the 3rd FXO to receive calls (as this line
> runs through our old-fashioned fax machine) BUT still be able to use
> it for outbound calls.  With our original, and very basic PBX we could
> modify the auto attendant on a particular PSTN line to pick up after 4
> rings (which would allow the fax to pickup after 2) while the rest of
> the lines picked up after 1 ring.  Anyone have a simple way for me to
> do this?


No need to go to all that trouble. Zap can be set up to automatically
detect fax tones. Then you can configure incoming faxes to be directed
to you fax machine and do whatever you want with everything else. Gone
are the days of dedicated fax lines.

http://www.voip-info.org/tiki-index.php?page=Asterisk%20fax

Look at the faxdetect stuff.

-Seth

-- 
Seth Remington
SaberLogic, LLC
661-B Weber Drive
Wadsworth, Ohio 44281
Phone: (330)335-6442
Fax: (330)336-8559