[Asterisk-Users] analog phone

[Dean Mumby]

Hi

I have been searching the wiki and mailing lists and I cant see where my 
config is incorrect. I have a Digium tdm11b
(1 fxo + 1 fxs) this is the output of
 cat /etc/zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
fxsks=1
fxoks=2
# channel 3, WCTDM, inactive.
# channel 4, WCTDM, inactive.

# Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"

# Global data

loadzone        = us
defaultzone     = us

ztcfg  -vv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)

2 channels configured.

I am running *@home and have used all defaluts , I configured the digium 
card using
/usr/local/sbin/genzaptelconf

I have then edited  /etc/asterisk/zapata-channels.conf
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;

; Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
signalling=fxs_ks
callerid=asrecieved
channel => 1


signalling=fxo_ks
context=incoming
callerid="Home" <4002>
mailbox=4002
channel => 2

; channel 3, WCTDM, inactive.
; channel 4, WCTDM, inactive.

; Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"

Adding "context=incomming and 4002 as the extension & mailbox"

I then created a call goup using AMP and added 4002 to the call group I 
am able to call the analog extension by dialing 700

I am however unable to call from the analog phone

when I pick up the handset it gives me a solid dialtone for about 2 
seconds and then hangs up
this is all that is seen when connecting to * using asterisk  -r
asterisk -r
Asterisk CVS-v1-0-03/19/05-19:13:43, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster at digium.com>
=========================================================================
Connected to Asterisk CVS-v1-0-03/19/05-19:13:43 currently running on 
asterisk1 (pid = 1639)
Verbosity is at least 3
    -- Starting simple switch on 'Zap/2-1'
    -- Hungup 'Zap/2-1'

this is the output of lsmod

 lsmod
Module                  Size  Used by    Not tainted
usbserial              23580   0  (autoclean) (unused)
parport_pc             18756   0  (autoclean) (unused)
lp                      8964   0  (autoclean)
parport                36832   0  (autoclean) [parport_pc lp]
autofs4                15928   0  (autoclean) (unused)
audit                  89816   3
8139too                17384   1
mii                     3956   0  [8139too]
crc32                   3712   0  [8139too]
ztdummy                 2464   0  (unused)
wcusb                  19520   0  (unused)
wcfxs                  35232   2
zaptel                178560   8  [ztdummy wcusb wcfxs]
floppy                 56656   0  (autoclean)
sg                     36204   0  (autoclean) (unused)
scsi_mod              106408   1  (autoclean) [sg]
microcode               5688   0  (autoclean)
keybdev                 2944   0  (unused)
mousedev                5524   0  (unused)
hid                    22116   0  (unused)
input                   5888   0  [keybdev mousedev hid]
usb-uhci               25740   0  [ztdummy]
usbcore                77376   1  [usbserial wcusb hid usb-uhci]
ext3                   85736   2
jbd                    50604   2  [ext3]

Please could someone point me in the right direction to allowing calls 
to be placed from the analog phone.

I am able to dialout using the fxo module and that all seems fine.

Regards
Dean








-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.8.3 - Release Date: 2005/03/25