[Asterisk-Users] X100P FXO card-No Dial Tone

[Jay Ray]

Hi 
 
  I have the X100P card which as to sockets (LINE - for fxo line ) and PHONE (to connect a n analog line)
 
This card is setup as fxs_ks   
 
   I was getting dial tone but suddenly no Dial Tone....Help appreciated.... 
  When I try to route the Call using - Dial Zap/1) to this FXO Line I get this error:
-------------------------------------
 
linux*CLI> 
    -- Executing Dial("SIP/5551000-b5cc", "Zap/1/345008") in new stack
Mar 25 13:17:34 NOTICE[3000]: app_dial.c:936 dial_exec_full: Unable to create channel of type 'Zap' (cause 0)
  == Everyone is busy/congested at this time (1:0/0/1)
 
---------------------------------------------------------------------------------------
 
 
Here the out put of zap show channel 1
*CLI> zap show channel 1
Channel: 1*CLI> 
File Descriptor: 18
Span: 1nux*CLI> 
Extension: CLI> 
Dialing: noCLI> 
Context: [inbound]
Caller ID: CLI> 
Calling TON: 0> 
Caller ID name: 
Destroy: 0*CLI> 
InAlarm: 1*CLI> 
Signalling Type: FXS Kewlstart
Owner: <None>I> 
Real: <None>LI> 
Callwait: <None>
Threeway: <None>
Confno: -1*CLI> 
Propagated Conference: -1
Real in conference: 0
DSP: nonux*CLI> 
Relax DTMF: no> 
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no 
Pulse phone: no 
Echo Cancellation: 0 taps unless TDM bridged, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Onhook
 

		
---------------------------------
Do you Yahoo!?
 Yahoo! Small Business - Try our new resources site! 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050325/c4820104/attachment.htm