[Asterisk-Users] IRQ headaches

[Mario.Spoljar at hypo-alpe-adria.com]

Gary,
I am using TE110P card with Asterisk at Home an I had some trouble to setup
corectly, maybe my experiance helps you

> Excuse my ignorance here, but I am desperately trying to isolate the IRQ
for
> my TE110P card (shown below as t1xxp) Ive gone into my bios and disabled
all

TE110P card should use wcte11xp drivers I am not sure about t1xxp (maybe
someone know if this is same under /proc/interrupts)

1. Edit /etc/init.d/zaptel and add driver for TE110p, and removed ztdummy
from there

      MODULES="torisa tor2 wct4xxp wct1xxp wcte11xp wcfxo wcfxs wcusb"

      RMODULES="wcusb wcfxs wcfxo wcte11xp wct1xxp wct4xxp tor2 torisa"


2. Edit /usr/src/zaptel/wcte11xp.c and add some lines to look like:

      static struct pci_device_id t1xxp_pci_tbl[] = {
        { 0xe159, 0x0001, 0x71fe, PCI_ANY_ID, 0, 0, (unsigned long)
"Digium Wildcard TE110P T1/E1 Board" },
        { 0xe159, 0x0001, 0x79fe, PCI_ANY_ID, 0, 0, (unsigned long)
"Digium Wildcard TE110P T1/E1 Board" },
        { 0xe159, 0x0001, 0x795e, PCI_ANY_ID, 0, 0, (unsigned long)
"Digium Wildcard TE110P T1/E1 Board" },
        { 0xe159, 0x0001, 0x79de, PCI_ANY_ID, 0, 0, (unsigned long)
"Digium Wildcard TE110P T1/E1 Board" },
        { 0xe159, 0x0001, 0x797e, PCI_ANY_ID, 0, 0, (unsigned long)
"Digium Wildcard TE110P T1/E1 Board" },
        { 0 }
};

3. cd /usr/src/zaptel; make clean; make install
      for this asterisk should be down (I suppouse)

4. /etc/init.d/zaptel restart

> I am running on an HP Compaq D530s with Fedora Core 1, here is my

I use CentOS (it should be similar)


Mario

mario.spoljar at hypo-alpe-adria.com