[Asterisk-Users] PRI: Call Reference Length not supported
Matthew Boehm
mboehm at cytelcom.com
Tue Mar 15 07:38:04 MST 2005
I'm not a PRI expert and therefore don't know what this debug stuff means
for PRI, so if anyone can help me here...
I'm running the latest libpri and zaptel from CVS.
Keep in mind that everything works fine when using the STABLE libpri and
zaptel.
I am NOT running CVS asterisk. I am running 1.0.6.
asterisk*CLI> pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (33)
> [ 00 01 01 43 ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 033 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
< [ 00 01 01 3b ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 029 P/F: 1
< 0 bytes of data
-- ACKing all packets from 28 to (but not including) 29
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
-- Executing Goto("SIP/3044-332a", "cytel-outgoing|92819870065|1") in
new stack
-- Goto (cytel-outgoing,92819870065,1)
-- Executing SetGroup("SIP/3044-332a", "cytel") in new stack
-- Executing CheckGroup("SIP/3044-332a", "5") in new stack
-- Executing GotoIf("SIP/3044-332a", "0?4:6") in new stack
-- Goto (cytel-outgoing,92819870065,6)
-- Executing SetCallerID("SIP/3044-332a", "Cypress <2814494000>|a") in
new stack
-- Executing Dial("SIP/3044-332a", "ZAP/R1d/2819870065|60") in new stack
asterisk*CLI>
> [ 00 01 3a 42 08 02 00 05 05 04 03 80 90 a2 18 03 a9 83 94 1c 1d 9f aa 06
80 01 00 82 01 00 8b 01 00 a1 0f 02 01 07 06 07 2a 86 48 ce 15 00 04 0a 01
00 1e 02 80 83 28 08 b1 43 79 70 72 65 73 73 6c 0c 21 80 32 38 31 34 34 39
34 30 30 30 70 0b a1 32 38 31 39 38 37 30 30 36 35 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 029 0: 0
> N(R): 033 P: 0
> 87 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=87
> Call Ref: len= 2 (reference 5/0x5) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
> Ext: 1 User information layer 1: u-Law (34)
> [18 03 a9 83 94]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type:
3
> Ext: 1 Channel: 20 ]
> [1c 1d 9f aa 06 80 01 00 82 01 00 8b 01 00 a1 0f 02 01 07 06 07 2a 86 48
ce 15 00 04 0a 01 00]
> Facility (len=31, codeset=0) [ 0x9f, 0xaa, 0x06, 0x80, 0x01, 0x00, 0x82,
0x01, 0x00, 0x8b, 0x01, 0x00, 0xa1, 0x0f, 0x02, 0x01, 0x07, 0x06, 0x07,
0x2a, 0x86, 'H', 0xce, 0x15, 0x00, 0x04, 0x0a, 0x01, 0x00 ]
> [1e 02 80 83]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: User (0)
> Ext: 1 Progress Description: Calling
equipment is non-ISDN. (3) ]
> [28 08 b1 43 79 70 72 65 73 73]
> Display (len= 8) Charset: 31 [ Cypress ]
> [6c 0c 21 80 32 38 31 34 34 39 34 30 30 30]
> Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user
number not screened (0) '2814494000' ]
> [70 0b a1 32 38 31 39 38 37 30 30 36 35]
> Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2819870065' ]
-- Called R1d/2819870065
asterisk*CLI>
< [ 00 01 01 3c ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 030 P/F: 0
< 0 bytes of data
-- ACKing all packets from 28 to (but not including) 30
-- ACKing packet 29, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
< [ 02 01 42 3c 08 02 80 05 5a 08 02 82 a9 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 033 0: 0
< N(R): 030 P: 0
< 9 bytes of data
-- ACKing all packets from 29 to (but not including) 30
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 5/0x5) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 02 82 a9]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Public network serving the local user (2)
< Ext: 1 Cause: Temporary failure (41), class = Network
Congestion (2) ]
Sending Receiver Ready (34)
> [ 02 01 01 44 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 034 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 0/20, span 1 got hangup
Mar 15 08:33:31 WARNING[31336]: chan_zap.c:7149 zt_pri_error: PRI: Call
Reference Length not supported: 0
Mar 15 08:33:31 WARNING[31336]: chan_zap.c:7149 zt_pri_error: PRI: Call
Reference Length not supported: 0
Mar 15 08:33:31 WARNING[31336]: chan_zap.c:7149 zt_pri_error: PRI: Call
Reference Length not supported: 0
asterisk*CLI>
< [ 02 01 44 3c 08 00 5a 08 02 82 a9 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 034 0: 0
< N(R): 030 P: 0
< 7 bytes of data
-- ACKing all packets from 29 to (but not including) 30
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=7
< Call Ref: len= 0 (reference 0/0x0) (Originator)
< Message type: RELEASE COMPLETE (90)
< [08 02 82 a9]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Public network serving the local user (2)
< Ext: 1 Cause: Temporary failure (41), class = Network
Congestion (2) ]
Sending Receiver Ready (35)
> [ 02 01 01 46 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 035 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Zap/20-1 is circuit-busy
-- Hungup 'Zap/20-1'
== Everyone is busy/congested at this time
-- Executing GotoIf("SIP/3044-332a", "0?b|1:92819870065|9") in new stack
-- Goto (cytel-outgoing,92819870065,9)
-- Executing Dial("SIP/3044-332a", "SIP/2819870065 at cisco7206|60") in new
stack
-- Called 2819870065 at cisco7206
-- SIP/cisco7206-736d is making progress passing it to SIP/3044-332a
-- SIP/cisco7206-736d answered SIP/3044-332a
-- Attempting native bridge of SIP/3044-332a and SIP/cisco7206-736d
asterisk*CLI> exit
Thanks in advance...
-Matthew
More information about the asterisk-users
mailing list