[Asterisk-Users] CAPI questions

[Elmar Haneke]

> Lastly, my capi.conf (as below) only defines one controller as this is 
> what we are testing with.  My understanding is that the interface block 
> (starting with 'msn=470' and ending with 'devices=2') needs to be 
> repeated for each of the four BRI adapters, but with the correct MSN for 
> each.

If you have different MSN then you have to repeat it for each controller.

If they are on the same MSN you can enter "devices=8" and 
"controller=1,2,3,4" or repeat which should also work.

Elmar