[Asterisk-Users] X100P connected as extension to Panasonic 616EASA-PHONE

[Guillermo Salas M]

On Thu, 2005-06-30 at 10:49 -0500, Guillermo Salas M wrote:
> On Thu, 2005-06-30 at 10:53 -0400, John Novack wrote:
> > Guillermo Salas M wrote:
> > 
> > >On Thu, 2005-06-30 at 16:33 +1000, Terry H. Gilsenan wrote:
> > >  
> > >
> > >> 
> > >>    
> > >>
> > >>>-----Original Message-----
> > >>>From: asterisk-users-bounces at lists.digium.com 
> > >>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> > >>>Jamie Carl
> > >>>Sent: Thursday, 30 June 2005 2:48 PM
> > >>>To: Asterisk Users Mailing List - Non-Commercial Discussion
> > >>>Subject: Re: [Asterisk-Users] X100P connected as extension to 
> > >>>Panasonic 616EASA-PHONE
> > >>>
> > >>>So what you're saying is, you can make inbound/outbound calls on 
> > >>>asterisk using an X100P connected to the PSTN.   Then you unplug the 
> > >>>X100P from the PSTN and plug it into a Panasonic 616 PABX and 
> > >>>suddenly nothing works?  Is that correct?
> > >>>      
> 
> [..]
> 
> > >I think you'll find the Panasonic box needs some attention...
> > >>>      
> > >>>
> > You need to determine why the X100 is off hook, resulting in your 
> > Panasonic  returning busy.
> > Station ports on the 616  are POTS FXS, so it is correct to do what you 
> > are doing, but for some reason the X100 is off hook.
> > Make sure you are connected to the line rather than the phone port on 
> > the X100, also make sure you are using a two wire cord from the 
> > Panasonic, as the 2nd pair is for Prop Panasonic phones data/power.
> > 
> 
> Thank you for you response, I've conected to the LINE port of the X100P
> I think the problem is because I'm using a 4 wire cord :(
> 
> I'll be changing the cord.
> 


Yes ... it works. I've changed the cord  for one with 2 wire.

Thank you very much for the help.

> > Can you ring the extension with the X100 unplugged?
> > 
> > If not, then either a bad station port or a bad cord.
> > 
> > Best of luck
> > 
> > John Novack
> > 
> > >>Actually, I think the problem is that when you plug in the Panasonic, you have two FXO devices connected together, and well that is just not going to
> > >>work.
> > >>
> > >>    
> > >>
> > >
> > >I'm a litle bit confused, the CO on the Panasonic are FXO (because the
> > >PSTN is connected there) and the internal extensions are FXS (I`ve
> > >phones FXO connected to the extensions), it is right?
> > >
> > >If the X100P is FXO, then I can connect to the internal extensions (like
> > >a phone)?
> > >
> > >Thank you for the help.
> > >
> > >  
> > >
> > >>It might be a good idea to read this:
> > >>
> > >>http://www.digium.com/index.php?menu=fxsvfxo
> > >>
> > >>T
> > >>
> > >>
> > >>    
> > >>
> > >>>Jamie
> > >>>
> > >>>
> > >>>Guillermo Salas M wrote:
> > >>>
> > >>>      
> > >>>
> > >>>>Hi all.
> > >>>>
> > >>>>I`ve installed a X100P on my box and is working well with 
> > >>>>        
> > >>>>
> > >>>incoming and 
> > >>>      
> > >>>
> > >>>>outgoing calls as a trunk with one PTSN line.
> > >>>>
> > >>>>I want to connect the X100P to my Panasonic 616 EASA-PHONE as an 
> > >>>>internal extension to permit to users to make calls to SIP 
> > >>>>        
> > >>>>
> > >>>devices from 
> > >>>      
> > >>>
> > >>>>analog phones, the problem is when I dial the ext number where the 
> > >>>>X100P is connected I get busy tone.
> > >>>>
> > >>>>What config I need to change to my asterisk files to permit the 
> > >>>>commented in the last paragraph?
> > >>>>
> > >>>>Best Regards,
> > >>>>
> > >>>>
> > >>>>        
> > >>>>
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Guillermo Salas M.
Telconet S.A. Manta
Calle 15 y Av. 24 Esq.
Phone : 593 5 262 8071
Mobile: 593 9 985 5138
SIP   : 103 at sip.manta.telconet.net
e-mail: gsalas at manta.telconet.net
www   : http://www.telconet.net
        http://www.telcocarrier.net

Linux User: 255902
Soporte en Linea en http://www.manta.telconet.net

Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html