[Asterisk-Users] Setting Caller ID after Dial

Huddleston, Robert RHuddleston at cavtel.com
Wed Jun 29 10:31:15 MST 2005


Ummm are you sure about this... I've seen people outpulse on PRI before.... It's dependent on the carrier - was my understanding. 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bryce Chidester
Sent: Wednesday, June 29, 2005 12:28 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Setting Caller ID after Dial

The CallerID that is seen by others on calls originating from your PRI is set by your PRI provider; you have no control from Asterisk about this as it gets overridden by the provider. You must contact your carrier and ask them to set the CallerID for all PRI lines to the desired name/number.

Regards,
Bryce Chidester
Rhino Equipment Corp.
bryce at rhinoequipment.com        SIP: 305 at rhinoequipment.zapto.org
+1 (480) 940-1826 x305                IAX:  
guest at rhinoequipment.zapto.org/305


On Jun 29, 2005, at 08:33, Chee Foong Chiew wrote:

> Hello,
>
> I have the following situation:
>
> I have a PRI with 200 DID numbers and I have set up 200 sip extensions 
> that matches the last 4 digit of the corresponding DID numbers so that 
> when any of the 200 DID number is called, asterisk can pass the call 
> to the respective sip extension. Incomming has been fine.
>
> But when making out going calls I want the called party to always see 
> the same number (which is one of the number selected from the 200 DID 
> numbers). This I can be achieved in asterisk by calling SetCallerID 
> before Dial command.
> However in the CDR, the caller id number of the number that i set 
> using SetCallerID is always logged and there is no trace of which sip 
> extension is making the call since the caller is always the same. This 
> has become a serious trouble for billing.
>
> I have been searching around and could not seems to get a solution. I 
> have tried DIAL_STATUS variable (only work if call is not answered), 
> using 'g' option in Dial command (does not work if calling party 
> hangup first), etc.
>
> Is there a solution or work around for this?
>
> Thanks in advance
>
> CCF
>
>
>
> ___________________________________________________________
> How much free photo storage do you get? Store your holiday snaps for 
> FREE with Yahoo! Photos http://uk.photos.yahoo.com 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list