[Asterisk-Users] Fw: linksys rt31p2 test case

[Michael Stahl]

These linksys boxes may be configured to ignore ICMP/PING on the WAN
side - so your connection may be ok!  Go to the config web pages of the
router to enable PING.
 
OCG

________________________________

From: Dionisis Koumouras [mailto:dionisis.koumouras at cyberstream.gr] 
Sent: Monday, June 27, 2005 6:36 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Fw: linksys rt31p2 test case


Hi all,
 
I'm trying to set up a test case for an ISP featuring an asterisk server
and a couple of linksys rt31p2-na routers registering on it.
 
Instead of using dsl lines, i'm trying to plug the * server and the
routers on a cisco switch, just to test their functionality.
I have created a vlan and a subnet on the switch and set up the ip
addresses of the routers in that subnet.
When i plug the routers in the switch through their internet port, i
cannot even ping them.
 
Is this normal behaviour? Are these routers only supposed to work with a
dsl/cable modem attached to that "internet" port?
 
I'm sure that i have not miscofigured the switch since i had a cisco
expert take care of that.
 
thx in advance,
Dionisis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050627/5b4a9a22/attachment.htm