[Asterisk-Users] RE: TDM400P & Channel Group

Adam Robins arobins at PharmaCentra.com
Wed Jun 22 10:56:04 MST 2005


I guess that my definition of "first available trunk" (either forward or
backward) differs from Digium. I would think that the card should know
which ports had an electical signal attached.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jason
Kawakami
Sent: Wednesday, June 22, 2005 12:47 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] RE: TDM400P & Channel Group



-----Original Message-----

Message: 18
<snip>

When I launch an outbound call as ZAP/g1/${EXTEN}, Asterisk goes to
Zap/1 and I hear dead air because there is no line attached to that
port.  Shouldn't it be smart enough to go to Zap/4 as the only available
port in the group?

-you obviously read the wiki enough to know about g1 as a parameter
telling
* to grab the first available line in group one *from the front to the
back*.  Look at the wiki again and look for the G1 parameter.  

In either case, I don't believe that * would skip over a channel that
didn't have an active line attached to it because that channel is not
seen as offhook (in use).  It would still grab the 4th line in your case
and you would get dead air.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.





More information about the asterisk-users mailing list