[Asterisk-Users] Unable to reconfigure channel

[Rich Adamson]

The reload command does not re-implement every single parameter change,
therefore in many cases one has to stop & restart asterisk.

 
> I have a problem with the cvs head zaptel library: I cannot update my zapata.conf into 
asterisk when I issue the reload command from the CLI
> prompt; only when I stop and restart the asterisk service.
> 
>  
> 
> The system sends the following message:
> 
>  
> 
>             Jun 20 09:49:14 WARNING[3754]: chan_zap.c:10364 setup_zap: Ignoring switchtype
> 
> Jun 20 09:49:14 WARNING[3754]: chan_zap.c:10364 setup_zap: Ignoring signalling
> 
>     -- Reconfigured channel 1, FXS Kewlstart signalling
> 
>     -- Reconfigured channel 2, FXS Kewlstart signalling
> 
>     -- Reconfigured channel 3, FXS Kewlstart signalling
> 
> Jun 20 09:49:14 ERROR[3754]: chan_zap.c:9827 setup_zap: Unable to reconfigure channel '4'
> 
> Jun 20 09:49:14 WARNING[3754]: chan_zap.c:10567 reload: Reload of chan_zap.so is unsuccessful!
> 
>  
> 
> I have the simplest configuration:
> 
>  
> 
>             [trunkgroups]
> 
> [channels]
> 
> language=en
> 
> context=default
> 
> switchtype=national
> 
>            
> 
> signalling=fxs_ks
> 
> channel => 1
> 
> channel => 2
> 
> channel => 3
> 
>  
> 
> I was using the cvs head version because I need the wctdm driver for the TDM04B (4*fxo modules)
> 
> Does anybody know what is wrong?
> 
>  
> 
> Thanks in advance!!
> 
>  
> 
> Jairo Barahona Garita
> 
> inCom Developer
---------------End of Original Message-----------------