[Asterisk-Users] Caller ID

Stojan Sljivic - GDS stojan.sljivic at gdspartners.com
Thu Jun 16 23:59:13 MST 2005


Hi,

My telco provider is SBC. I think that they use FSK to transmit caller ID.
How can I set-up Asterisk so that I can see caller ID on incoming calls.

Regards,
Stojan Sljivic 


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Calin Serbanescu
> Sent: Wednesday, June 15, 2005 19:25
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Caller ID
> 
> 
> What standard does your telco send the caller-id in ? ETSI 
> FSK, bellcore... ? 
> 
> On Wed, 2005-06-15 at 16:26 +0200, Stojan Sljivic - GDS wrote:
> > Hi Juan,
> > 
> > I have Caller Id service enabled. When I connect the line 
> to the phone 
> > I see the caller Id on the phone's display.
> > 
> > I have callerid=asreceived. I have also played with various 
> > combinations of cidsignalling and cidstart, but with no success.
> > 
> > Regards,
> > Stojan Sljivic
> > 
> > 
> > > -----Original Message-----
> > > From: asterisk-users-bounces at lists.digium.com
> > > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> > > Juan Manuel Coronado Z.
> > > Sent: Wednesday, June 15, 2005 15:37
> > > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > > Subject: Re: [Asterisk-Users] Caller ID
> > > 
> > > 
> > > Hi,
> > > 
> > > First, you must ensure that the your Telco is sending you the
> > > caller ID with incoming calls. In some countries this is an 
> > > aditional service you have to pay for, upon request.
> > > 
> > > If you already have the service from the Telco, check in your
> > > zapata.conf that you have "callerid=asreceived" on your 
> > > channels and group definitions.
> > > 
> > > Hope this will help.
> > > 
> > > Regards,
> > > 
> > > 
> > > Juan Manuel Coronado Z.
> > > 
> > > 
> > > On mar, 2005-06-14 at 14:50 +0200, Stojan Sljivic - GDS wrote:
> > > > Hi,
> > > >  
> > > > I'm using TDM04B and Asterisk 1.0.5.
> > > >  
> > > > How can I setup the Asterisk so that I get caller ID?
> > > > I do not get caller ID currently.
> > > >  
> > > > Regards,
> > > > Stojan Sljivic _______________________________________________
> > > > Asterisk-Users mailing list Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com 
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 




More information about the asterisk-users mailing list