[Asterisk-Users] PRI trouble

Michael Di Martino mdm at bigmtnskier.com
Sun Jun 12 07:23:05 MST 2005


On Sun, 2005-06-12 at 20:09 -0400, Andrew Kohlsmith wrote:
> On Sunday 12 June 2005 06:10, Michael Di Martino wrote:
> > Out of the blue i started receiving the following error on my PRI line
> > which connects my asterisk server to a Norstar 0x32 key system.
> 
> Well first off, it's likely not the norstar 0x32 -- that is a 32-station 
> module.  You've likely got a MICS (my guess, I have one too).
> 
> > The asterisk zaptel.conf file was configure as follows and this config
> > worked for 6 months until friday. Nothing was changed on either system
> > prior to friday. here is teh zaptel.conf
> 
> Obviously something has.  :-)  What's the MICS say as far as its DTI 
> configuration?  What's its event log say?
> 
> > However i still get the same error. Please help we cannot connect call
> > form my norstar to asterisk w/ it dropping in 10 seconds.
> 
> Sounds like someone changed the pri signaling.
> 
> -A.
> _______________________________________________
> Asterisk-Users mailing list
I am thinking it is a timing issue but i am not certain.
What type of signaling and timing do you use to connect to your 
MICS. And yes my 0x32 is a MICS.

Thanks
Mike




More information about the asterisk-users mailing list