[Asterisk-Users] No path to translate from SIP/615-25c8(256)toSIP/601-27b6(4)

Ronald Wiplinger ronald at elmit.com
Sat Jun 11 10:36:12 MST 2005


Joshua Colp wrote:

> Codecs are negotiated between asterisk and the device, not device to
>device... So since you specify G729, one side negotiated to G729 first...
>Then when you dialed the other device, that one negotiated at ULAW... And
>then when they attempted to be bridged together - voila, failure.
>  
>

Exactly here I see the problem!
Why did one phone could negotiate to use g729, although it is not on 
Asterisk???? It should therefore go to the next line, shouldn't it?


bye

Ronald

>- Joshua Colp.
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ronald
>Wiplinger
>Sent: Saturday, June 11, 2005 1:20 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [Asterisk-Users] No path to translate from
>SIP/615-25c8(256)toSIP/601-27b6(4)
>
>Joshua Colp wrote:
>
>  
>
>>One side is using G729, the other is using ULAW. Asterisk is having to 
>>convert between the two and can not, probably because you do not have 
>>the
>>G729 codec with the proper license ($10/channel from Digium).
>>
>> 
>>
>>    
>>
>
>You are right! I removed g729, but I still wonder, why it did not go to the
>next line!!!!
>
>[snom-190]
>...
>disallow=all
>allow=g729
>allow=ulaw                    
>allow=alaw
>
>
>bye
>
>Ronald
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>  
>


-- 
Ronald Wiplinger  (CEO of ELMIT)
http://www.elmit.com    +886 (0) 939--77-55-16  or FWD 511208
- I'm a SpamCon Foundation Member, #694, Verify it at http://www.spamcon.org

PS: Spam prevention!
Our system is protected with a spam prevention program. 
If you send us an e-mail, our system will send you a confirmation message back. Just reply to this confirmation message please. 
After receiving this confirmation message, our system will send the hold message (one) and all future messages (after the received confirmation message) to me without asking you again.





More information about the asterisk-users mailing list