[Asterisk-Users] CallerID/chan_sccp

[Joseph]

On Thu, 2005-06-09 at 11:57 -0400, Mark Johnson wrote:
> I just downloaded the latest chan_sccp and am having problems with 
> internal to internal calls with callerid.  I added a few debug lines to 
> the code to help sort it out, but here's what happens...  Exten 581 
> calls 580.  On the display 581 shows "Unknown number to 580".  On exten 
> 580, the display shows "Test Phone2 to Unknown number".  Here are some 
> of the lines from the CLI including my added debug lines:
> 
>     -- Set calledParty Name: Test Phone1 Number 580
>     -- Executing Dial("SCCP/581-00000005", "SCCP/580|15|Ttr") in new stack
>  SCCP trying to call SCCP, format 4, data, 580
>     --  --*> 581
>     -- New channel context: office
>     -- Asterisk request to call: SCCP/580-00000006
>     -- Set callingParty Name: Test Phone2 Number 581
>   == Sending Packet Type SetLampMessage (16 bytes)
>   == Sending Packet Type SetRingerMessage (8 bytes)
>   == {CallStateMessage} callState=RingIn(4), lineInstance=1, callReference=6
>   == Sending Packet Type CallStateMessage (28 bytes)
> *** Calling Party Name: Test Phone2
> *** Calling Party Number: 581
> *** Called Party Name:
> *** Called Party Number:
>   == Sending Packet Type CallInfoMessage (208 bytes)
>   == Sending Packet Type DisplayPromptStatusMessage (48 bytes)
>   == {SelectSoftKeysMessage} lineInstance=1 callReference=6 
> softKeySetIndex=3 validKeyMask=65535/65535
>   == Sending Packet Type SelectSoftKeysMessage (20 bytes)
>     -- Called 580
>     -- Asked to indicate '3' (Dialing) condition on channel 
> SCCP/581-00000005
>     -- Current tone (36) is equiv to wanted tone (36).  Ignoring.
>   == Sending Packet Type DisplayPromptStatusMessage (48 bytes)
>   == {CallStateMessage} callState=RingOut(3), lineInstance=1, 
> callReference=5
>   == Sending Packet Type CallStateMessage (28 bytes)
> *** Calling Party Name:
> *** Calling Party Number:
> *** Called Party Name: Test Phone1
> *** Called Party Number: 580
> 
> 
> The lines beginning with "***" are the debug lines I added inside the 
> sccp_channel_send_callinfo function.  Any ideas?
> 
> Mark
> 

Is this CVS-HEAD?

It seems to work fine on cvs head.

I think there where some changes in the current cvs head vs the stable
that may make stable caller id not work.

-- 
respectfully, Joseph ===============
---------------------= **********  =