[Asterisk-Users] connecting Asterisk to NEC NEAX system

[Dennis Walker]

in zapata.conf

use emdigitwait=###       number of milliseconds to wait for digits to be output

I had similar problems with MITEL system and had

emdigitwait=500



----------
From: 	Edwin Lam[SMTP:elam at officegeneral.com]
Reply To: 	Asterisk Users Mailing List - Non-Commercial Discussion
Sent: 	Tuesday, June 07, 2005 6:40 PM
To: 	asterisk-users at lists.digium.com
Subject: 	[Asterisk-Users] connecting Asterisk to NEC NEAX system

hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable
and the Digium TE405P using E&M wink signaling. the connection's ok. however
when dialing from the NEC to the Asterisk. most of the time the Asterisk only
sees the first digit of the dialed number(which is 4 digits). some time if i
dialed the 4 digits very fast it might get through. seems like there's a timming
issue of the DTMF. what can i do to solve this? i looked through the docs
for zaptel.conf & zapata.conf and doesn't seems there's any parameters to
control the DTMF timing.

-- 
Edwin Lam <edwin at officegeneral.com>
Systems Engineer, Office General, Inc.
Ph: +1 415 439 4988 Fax: +1 415 283 3370
http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users