[Asterisk-Users] Problems hanging up PSTN line

[db_nz at paradise.net.nz]

I'm running 0.9 I will try upgrading thanks
 
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Terry H.
Gilsenan
Sent: Wednesday, June 01, 2005 9:33 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Problems hanging up PSTN line
 
Hi,
 
What version of Asterisk @ Home are you using?
 
I had problems like that until I upgraded to version 1.0
 
The problem has not recurred since.
 
Regards,
T
 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
db_nz at paradise.net.nz
Sent: Wednesday, 1 June 2005 7:24 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Problems hanging up PSTN line
I am having problems with * not hanging up an incoming PSTN line, if
that line is not answered before the person calling in hangs up.
The line hangs in various states, it has hung with a busy tone, with no
tone at all. 
I am running *@home and have a digium 4port line card. This was
configured by the genzaptel command I then added trunks for each line.
 
 
I also have a Pulver WiSip phone which I need to be able to transfer
calls on by dialing a prefix. Eg *2<ext>
 
Any help on either problem would be greatly appreciated, I'm still
learning my way around the whole * & *@home thing.
 
Rick
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050601/1609c5cf/attachment.htm