[Asterisk-Users] Re: US CallerID and TDM04B

[Boris Zolotarev - Pamet]

Thanks for the response but still no luck.
I added those two lines just after the [channel] and updated my dial plan but the result is the same (there is no CallerID):
Asterisk Ready.
    -- Starting simple switch on 'Zap/1-1'
Jul 26 00:43:34 NOTICE[8867]: chan_zap.c:5367 ss_thread: Got event 2 (Ring/Answered)...
    -- Executing Wait("Zap/1-1", "2") in new stack
    -- Executing NoOp("Zap/1-1", "") in new stack
    -- Executing SetVar("Zap/1-1", "dnis=100") in new stack
...

I hope you have some more ideas, please?

BTW, is there anyone using Asterisk with SBC Telco in the US?
Does your asterisk recognize CallerID?

Thanks,
Boris Zolotarev
boris.zolotarev at gdspartners.com



> I have new TDM04B installed and working fine with Asterisk 1.0.5 built on RedHat 9.
>  
> All is working fine except CallerID that bothers me big time.
> I have several Panasonic and Sony phones and CallerID works fine with it (when I plug in the 
line into phone instead into
> Asterisk I get CallerID) but fails with Asterisk.
>  
> I am based in California (San Francisco) and my Telco is SBC (http://www.sbc.com/).
>  .
> I would really appreciate if anyone could take a look below at my zapata.conf and 
extensions.conf and let me know what is
> wrong.
>  
> :: zapata.conf ::
>  
> [channels]

Try adding these right here (right after [channels]. Let's see if
that has any impact on the problem. 
cidsignalling=bell                       
cidstart=ring                                                                   

> context=default
> switchtype=national
> signalling=fxs_ks
> usecallerid=yes
> callerid=asreceived
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=400
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> busydetect=yes
> busycount=7
> musiconhold=default
> faxdetect=both
> context=zap
> group=1
> channel => 1-4
>  
>  
> :: extensions.con ::
>  
> I use this part of the code to trace Asterisk log and check CallerID and CallerIDName.
>  
> [zap]
> exten => s,1,Wait(2)
> exten => s,2,Answer()
> exten => s,3,SetVar(dnis=100)
> exten => s,4,NoOp,${CALLERID}
> exten => s,5,NoOp,${CALLERIDNAME}

For incoming Zap calls (from the TDM card), you do not need to "answer"
the call unless you're going into an IVR. If you are simply ringing
a sip phone, do something like this:

[zap]
exten => s,1,NoOp,${CALLERID}                                      
exten => s,2,Dial(Sip/1234,15) 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050726/62a95457/attachment.htm