[Asterisk-Users] Wengo config and G729(a)

[Asterisk user list]

Hello

Here you go :

[wengo-outgoing]
type=peer
fromuser= username
username= username
secret=password
host=voip.wengo.fr
fromdomain=voip.wengo.fr
disallow=all
allow=alaw
allow=ulaw
dtmfmode=inband
canreinvite=yes
nat=yes
insecure=very
dtmf=inband
context=wengo-outgoing
authname= username

This is my current working config BUT to have it working, you have to add this entry to your /etc/host file (and reboot your Asterisk config...):

213.91.9.219		voip.wengo.fr


Hope this help....

Regards



Michel LOPEZ [MVP Exchange] France
__________________________________


> -----Message d'origine-----
> De : asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] De la part de Remco Barende
> Envoyé : lundi 25 juillet 2005 19:45
> À : MailinglistAsterisk at maison.lopez.nom.fr
> Objet : Re: [Asterisk-Users] Wengo config and G729(a)
> 
> One way would do for me, I only use wengo for my outbound calls since they
> are a lot cheaper than our Royal Dutch KPN :)
> 
> Which codec did you use and could you post your config lines?
> 
> Thanks!!
> Remco
> 
> On Mon, 25 Jul 2005, Wilson Pickett wrote:
> 
> >> Also they switched codecs, now G720a is required to connect. I can only
> >> find an (open) G729 codec, is this the same as G729a?
> >
> > I only have it working one-way, no incoming calls. Ironically, when
> > Mark was here we caould have gone to meet them and straighten it out
> > once and for all :)