[Asterisk-Users] Should this work?

[Jason Walker]

Have you defined the context "default" in the extensions.conf for outbound dialing in the globals section?

For example, I have my ZAP channels identified as OUTBND1 not ZAP in the global section. This new global identifier is pointed to ZAP/g1

[globals]
OUTBND1=Zap/g1


Instead of ZAP in my dial plan to call out, I use ${OUTBND1}.

Yours:

; for dialing outbound - over ISDN line - this bit does not work
exten => _9XX.,2,Dial(ZAP/g1/${EXTEN},60)
exten => _9XX.,2,Hangup

Mine would look like this
exten => _9XX.,1,Dial(${OUTBND1}/${EXTEN},##)
exten => _9XX.,2,Hangup


This helps me to keep track of inbound T1s and outbound T1s.

Also, you have 2 (2) priorities listed in your example. You can't really do this.

JASON WALKER
  ----- Original Message ----- 
  From: Angus Comber 
  To: asterisk-users at lists.digium.com 
  Sent: Monday, July 25, 2005 8:11 AM
  Subject: [Asterisk-Users] Should this work?


  Hello

  I am using a Junghans quadBRI ISDN card and it is loaded and working.  In Asterisk if I connect to ISDN line it is detected and tells me so.

  In my zapata.conf I have (abbreviated):

  [channels]
  switchtype=euroisdn
  signalling = bri_cpe

  context=default
  group=1
  channel => 1-2

  ;plus group 2 - 4


  zaptel.conf:
  loadzone=uk
  defaultzone=uk
  # qozap span definitions
  # most of the values should be bogus because we are not really zaptel
  span=1,1,3,ccs,ami
  span=2,0,3,ccs,ami
  span=3,0,3,ccs,ami
  span=4,0,3,ccs,ami

  bchan=1,2
  dchan=3
  bchan=4,5
  dchan=6
  bchan=7,8
  dchan=9
  bchan=10,11
  dchan=12



  Then in extensions.conf I have:

  [default]
  ; this below for internal extensions - works OK
  exten => _2XX,1,Dial(SIP/${EXTEN},20,Ttm)

  ; for dialing outbound - over ISDN line - this bit does not work
  exten => _9XX.,2,Dial(ZAP/g1/${EXTEN},60)
  exten => _9XX.,2,Hangup

  Error I get is:

      -- Executing Dial("SIP/200-e433", "ZAP/g1/902088787367|60") in new stack
  Jul 25 11:56:33 NOTICE[6723]: app_dial.c:777 dial_exec: Unable to create channel of type 'ZAP'
    == Everyone is busy/congested at this time
      -- Executing Hangup("SIP/200-e433", "") in new stack
    == Spawn extension (default, 902088787367, 2) exited non-zero on 'SIP/200-e433'



  I am dialing with sip phones.  They work if dialing extensions internally but not if try to dial outside - eg dial 9 followed by number.

  What have I not done right?

  Angus



------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050725/d3db489d/attachment.htm