[Asterisk-Users] SPA3000 to Asterisk Server - Asterisk server not answering calls

[John Middleton]

I resolved this - I'm in the UK, and the problem was due to the cable (you 
need a two wire RJ cable) - I replaced it and it worked fine.
 Thanks

 On 7/13/05, Luki <lugosoft at gmail.com> wrote: 
> 
> John,
> 
> all this "ringing" makes me think that your "PSTN Ring Timeout" is too
> low. Increase it by a second or two and try again (it probably is on
> the PSTN tab in the web config menu of the SPA). I may be wrong, but I
> know for sure that my setup shows only one "ringing" message...
> 
> --Luki
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050715/b0c87dff/attachment.htm