[Asterisk-Users] ASterisk@home + Broadvoice = Almost working installation...

Tom Rymes trymes at rymesheating.com
Mon Jul 11 07:29:08 MST 2005


Is your server behind a NAT? If so, make sure that you have configured  
/etc/asterisk/sip_nat.conf with your proper settings (change the  
localnet and externip settings to match your setup):

nat=yes
externip=xxx.xxx.xxx.xxx
localnet=10.0.0.0/255.255.255.0

sip_nat.conf may only affect your extensions, not Broadvoice, but you  
also need to make sure that your NAT is forwarding the relevant ports  
through to your server for SIP (5060, 10000-20000, if I remember  
correctly)

Finally, look at the geekgazette article for the proper way to set up  
your Broadvoice Trunk in AMP:  
<http://geekgazette.com/index.php? 
option=com_content&task=view&id=20&Itemid=31>

Also, it would help to double-check that your system is indeed  
registering with Broadvoice by running the command "sip show registry"  
at the command asterisk prompt.

Tom

On Jul 11, 2005, at 9:18 AM, jr at kahari.com wrote:

> Hello Guys,
>
> I'm somewhat of a newbie and am desperately seeking for some help...
>
> I've managed to get asterisk up and running on my server, and signed  
> up with a
> broadvoice account...
>
> I'm having no problem dialing and communicating between extensions,  
> but whenever
> anyone tries to call my broadvoice account, they are greeted by no  
> ring or
> anything, but rather simply a direct to voicemail...
>
> Also, the most annoying is when I try to place an outside call...
>
> At that point, if the call is to a regular phone number, I'll get a  
> message
> asking me to enter my password... followed by pound...
>
> Any idea, how I can resolve this issue? I feel like i'm very close to  
> getting
> this thing working, but I'm pretty frustrated because I don't know  
> what to edit
> or change at this point...
>
> Below is my configurational files..
> +++++++++++++++++++++++++++++++++++++
>
> ; Note: If your SIP devices are behind a NAT and your Asterisk
> ; server isn't, try adding "nat=1" to each peer definition to
> ; solve translation problems.
>
> [general]
> externip=69.165.XXX.XXX
> localnet=192.168.1.105/255.255.255.0
>
> port = 5060 ; Port to bind to (SIP is 5060)
> bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
> disallow=all
> allow=ulaw
> allow=alaw
> context = from-sip-external ; Send unknown SIP callers to this context
> callerid = Unknown
>
> register =>
> 3055741428 at sip.broadvoice.com:MYSECRETPASS: 
> 3055741428 at sip.broadvoice.com/200
>
> [sip.broadvoice.com]
> type=peer
> ;Enter your closest proxy server
> host=proxy.mia.broadvoice.com
> fromdomain=sip.broadvoice.com
> fromuser=3055741428
> secret=MYSECRETPASS
> context=from-broadvoice
> ;Disable canreinvite if you are behind a NAT
> canreinvite=no
> ;Don't try to authenticate on incoming calls
> insecure=very
>
> #include sip_nat.conf
> #include sip_custom.conf
> #include sip_additional.conf
>
> +++++ EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++
> EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++  
> EXTENSIONS+++++
> EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++  
> EXTENSIONS+++++
> EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++  
> EXTENSIONS+++++
> EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++  
> EXTENSIONS+++++
> EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++ EXTENSIONS+++++  
> EXTENSIONS
>
> ; Asterisk Management Portal (AMP)
> ; Copyright (C) 2004 Coalescent Systems Inc
>
> ; dialparties.agi (»www.sprackett.com/asterisk/)
> ; Asterisk::AGI (»asterisk.gnuinter.net/)
> ; gsm (»www.ibiblio.org/pub/Linux/utils/compre..)
> ; loligo sounds (»www.loligo.com/asterisk/sounds/)
> ; mpg123 (»voip-info.org/wiki-Asterisk+config+mus..)
>
> ; include extension contexts generated from AMP
> #include extensions_additional.conf
>
> ; Customizations to this dialplan should be made in  
> extensions_custom.conf
> ; See extensions_custom.conf.sample for an example
> #include extensions_custom.conf
>
> [from-trunk] ; just an alias since VoIP shouldn't be called PSTN
> include => from-pstn
>
> [from-pstn]
> include => from-pstn-custom ; create this context in  
> extensions_custom.conf to
> include customizations
> include => ext-did
> include => from-pstn-timecheck ; this has to be included otherwise it  
> overrides
> ext-did
>
> [from-pstn-timecheck]
> exten => .,1,Goto(s,1) ; catch-all matching for calls that have DID  
> info (if a
> DID route hasn't matched them)
> exten => s,1,GotoIf($[${IN_OVERRIDE} =  
> forcereghours]?from-pstn-reghours,s,1
> exten => s,2,GotoIf($[${IN_OVERRIDE} =  
> forceafthours]?from-pstn-afthours,s,1
> exten =>  
> s,3,GotoIfTime(${REGTIME}|${REGDAYS}|*|*?from-pstn-reghours,s,1
> exten => s,4,Goto(from-pstn-afthours,s,1)
>
> [from-pstn-reghours]
> exten => s,1,GotoIf($[${FAX_RX} =  
> disabled]?from-pstn-reghours-nofax,s,1:2) ; if
> fax detection is disabled, then jump to from-pstn-nofax - else continue
> exten => s,2,Answer
> exten => s,3,Wait(1)
> exten => s,4,SetVar(intype=${INCOMING})
> exten => s,5,Cut(intype=intype,-,1)
> exten => s,6,GotoIf($[${intype} = EXT]?7:9) ; If INCOMING starts with  
> EXT, then
> assume its an extension
> exten => s,7,Wait(3) ;wait 3 more second to make sure this isn't a fax  
> before
> dialing someone
> exten => s,8,Goto(ext-local,${INCOMING:4},1)
> exten => s,9,GotoIf($[${intype} = GRP]?10:12) ; If INCOMING starts  
> with GRP,
> then assume its a ring group
> exten => s,10,Wait(3)
> exten => s,11,Goto(ext-group,${INCOMING:4},1)
> exten => s,12,GotoIf($[${intype} = QUE]?13:15)
> exten => s,13,Wait(3)
> exten => s,14,Goto(ext-queues,${INCOMING:4},1)
> exten => s,15,Goto(${INCOMING},s,1) ; not EXT or GR1 - it's an auto  
> attendant
> exten => fax,1,Goto(ext-fax,in_fax,1)
> exten => h,1,Hangup
>
> [from-pstn-reghours-nofax]
> exten => s,1,SetVar(intype=${INCOMING})
> exten => s,2,Cut(intype=intype,-,1)
> exten => s,3,GotoIf($[${intype} = EXT]?4:5) ; If INCOMING starts with  
> EXT, then
> assume its an extension
> exten => s,4,Goto(ext-local,${INCOMING:4},1)
> exten => s,5,GotoIf($[${intype} = GRP]?6:7) ; If INCOMING starts with  
> GRP, then
> assume its a ring group
> exten => s,6,Goto(ext-group,${INCOMING:4},1)
> exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue
> exten => s,8,Answer ; answer call before queue
> exten => s,9,Wait(1)
> exten => s,10,Goto(ext-queues,${INCOMING:4},1)
> exten => s,11,Answer ; answer call before auto attendant
> exten => s,12,Wait(1)
> exten => s,13,Goto(${INCOMING},s,1) ; not EXT or GR1 - it's an auto  
> attendant
> exten => fax,1,Goto(ext-fax,in_fax,1)
> exten => h,1,Hangup
>
> [from-pstn-afthours]
> exten => s,1,GotoIf($[${FAX_RX} =  
> disabled]?from-pstn-afthours-nofax,s,1:2) ; if
> fax detection is disabled, then jump to from-pstn-nofax - else continue
> exten => s,2,Answer
> exten => s,3,Wait(1)
> exten => s,4,SetVar(intype=${AFTER_INCOMING})
> exten => s,5,Cut(intype=intype,-,1)
> exten => s,6,GotoIf($[${intype} = EXT]?7:9) ; If INCOMING starts with  
> EXT, then
> assume its an extension
> exten => s,7,Wait(3) ;wait 3 more second to make sure this isn't a fax  
> before
> dialing someone
> exten => s,8,Goto(ext-local,${AFTER_INCOMING:4},1)
> exten => s,9,GotoIf($[${intype} = GRP]?10:12) ; If INCOMING starts  
> with GRP,
> then assume its a ring group
> exten => s,10,Wait(3)
> exten => s,11,Goto(ext-group,${AFTER_INCOMING:4},1)
> exten => s,12,GotoIf($[${intype} = QUE]?13:15)
> exten => s,13,Wait(3)
> exten => s,14,Goto(ext-queues,${AFTER_INCOMING:4},1)
> exten => s,15,Goto(${AFTER_INCOMING},s,1) ; not EXT or GR1 - it's an  
> auto attendant
> exten => fax,1,Goto(ext-fax,in_fax,1)
> exten => h,1,Hangup
>
> [from-pstn-afthours-nofax]
> exten => s,1,SetVar(intype=${AFTER_INCOMING})
> exten => s,2,Cut(intype=intype,-,1)
> exten => s,3,GotoIf($[${intype} = EXT]?4:5) ; If INCOMING starts with  
> EXT, then
> assume its an extension
> exten => s,4,Goto(ext-local,${AFTER_INCOMING:4},1)
> exten => s,5,GotoIf($[${intype} = GRP]?6:7) ; If INCOMING starts with  
> GRP, then
> assume its a ring group
> exten => s,6,Goto(ext-group,${AFTER_INCOMING:4},1)
> exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue
> exten => s,8,Answer ; answer call before queue
> exten => s,9,Wait(1)
> exten => s,10,Goto(ext-queues,${AFTER_INCOMING:4},1)
> exten => s,11,Answer ; answer call before auto attendant
> exten => s,12,Wait(1)
> exten => s,13,Goto(${AFTER_INCOMING},s,1) ; not EXT or GR1 - it's an  
> auto attendant
> exten => fax,1,Goto(ext-fax,in_fax,1)
> exten => h,1,Hangup
>
> ;  
> ####################################################################### 
> #####
> ; Macros [macro]
> ;  
> ####################################################################### 
> #####
>
> ; Rings one or more extensions. Handles things like call forwarding  
> and DND
> ; We don't call dial directly for anything internal anymore.
> ; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, ...
> ; Use a Macro call such as the following:
> ; Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,...)
> [macro-dial]
> exten => s,1,GotoIf($[ "${MACRO_CONTEXT}" = "macro-rg-group" ]?4:2) ;  
> if this is
> from rg-group, don't strip prefix
> exten => s,2,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} !=  
> ${RGPREFIX}]?4:3)
> ; check for ring-group prefix
> exten => s,3,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip  
> off prefix
> exten => s,4,AGI,dialparties.agi
> exten => s,5,NoOp(Returned from dialparties with no extensions to call)
> exten => s,6,SetVar(DIALSTATUS=BUSY)
> exten => s,10,Dial(${ds}) ; dialparties will set the priority to 10 if  
> $ds is
> not null
>
> ; Ring an extension, if the extension is busy or there is no answer  
> send it
> ; to voicemail
> ; ARGS: $VMBOX, $EXT
> [macro-exten-vm]
> exten => s,1,Setvar(FROMCONTEXT=exten-vm)
> exten => s,2,Macro(record-enable,${ARG2},IN)
> exten => s,3,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${ARG2})
> exten => s,4,GotoIf($[${CHANNEL:0:5} = Local]?s-${DIALSTATUS},1) ; if  
> the
> channel is Local, then do not go to voicemail. This is primarily to  
> avoid vm for
> call-forwarded extensions in ring groups
> exten => s,5,GotoIf($[${ARG1} = novm]?s-${DIALSTATUS},1) ; no  
> voicemail in use
> for this extension
> exten => s,6,NoOp(Sending to Voicemail box ${ARG1})
> exten => s,7,Macro(vm,${ARG1},${DIALSTATUS})
> exten => s-BUSY,1,NoOp(Extension is reporting BUSY and has no  
> Voicemail)
> exten => s-BUSY,2,Busy()
> exten => s-BUSY,3,Wait(60)
> exten => s-BUSY,4,NoOp()
> exten => _s-.,1,Congestion()
>
> [macro-vm]
> exten => s,1,Goto(s-${ARG2},1)
> exten => s-BUSY,1,Voicemail(b${ARG1}) ; Voicemail Busy message
> exten => s-BUSY,2,Hangup()
> exten => _s-.,1,Voicemail(u${ARG1}) ; Voicemail Unavailable message
> exten => _s-.,2,Hangup()
> exten => o,1,Background(one-moment-please) ; 0 during vm message will  
> hangup
> exten => o,2,GotoIf($["foo${FROM_DID}" =
> "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1)
> exten => a,1,VoiceMailMain(${ARG1})
> exten => a,2,Hangup
>
> ; For some reason, if I don't run setCIDname, CALLERIDNAME will be  
> blank in my AGI
> ; ARGS: none
> [macro-fixcid]
> exten => s,1,SetCIDName(${CALLERIDNAME})
>
> ; Ring groups of phones
> ; ARGS: comma separated extension list
> ; 1 - ringtimer
> ; 2 - preifx
> ; 3 - extension list
> [macro-rg-group]
> exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} !=  
> ${RGPREFIX}]?3:2)
> ; check for old prefix
> exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip  
> off old prefix
> exten => s,3,Setvar(RGPREFIX=${ARG2}) ; set new prefix
> exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME}) ; add prefix to  
> callerid name
> exten => s,5,Setvar(RecordMethod=Group) ; set new prefix
> exten => s,6,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
> exten => s,7,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3})
>
> ;exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} !=
> ${RGPREFIX}]?3:2) ; check for old prefix
> ;exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip  
> off old prefix
> ;exten => s,3,Setvar(RGPREFIX=${ARG2}) ; set new prefix
> ;;exten => s,4,Noop(${RGPREFIX} ${CALLERIDNAME})
> ;exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME}) ; add prefix to  
> callerid name
> ;;exten => s,6,Noop(Dial group ${ARG3})
> ;exten => s,5,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3})
>
> ;exten => s,1,Setvar(GRP=${GRP}) ;my original choice of variable GROUP  
> is now
> overwritten by SetGroup. Copy contents to GRP
> ;exten => s,2,SetGroup(${CALLERIDNUM})
> ;exten => s,3,Setvar(FROMCONTEXT=rg-group)
> ;exten => s,4,SetCIDName(${PRE}${CALLERIDNAME})
> ;exten => s,5,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${GRP})
>
> ;
> ; Outgoing channel(s) are busy ... inform the client
> ;
> [macro-outisbusy]
> exten => s,1,Playback(allison7/all-circuits-busy-now)
> exten => s,2,Playback(allison7/pls-try-call-later)
> exten => s,3,Macro(hangupcall)
>
> ; What to do on hangup.
> [macro-hangupcall]
> exten => s,1,ResetCDR(w)
> exten => s,2,NoCDR()
> exten => s,3,Wait(5)
> exten => s,4,Hangup
>
> [macro-faxreceive]
> exten => s,1,SetVar(FAXFILE=/var/spool/asterisk/fax/${UNIQUEID}.tif)
> exten => s,2,SetVar(EMAILADDR=${FAX_RX_EMAIL})
> exten => s,3,rxfax(${FAXFILE})
> exten => s,103,SetVar(EMAILADDR=${FAX_RX_EMAIL})
> exten => s,104,Goto(3)
>
> ; dialout and strip the prefix
> [macro-dialout]
> exten => s,1,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?4) ;check for  
> CID override
> for exten
> exten => s,2,SetCallerID(${ECID${CALLERIDNUM}})
> exten => s,3,Goto(6)
> exten => s,4,GotoIf($[foo${OUTCID_${ARG1}} = foo]?6) ;check for CID  
> override for
> trunk
> exten => s,5,SetCallerID(${OUTCID_${ARG1}})
> exten => s,6,SetVar(length=${LEN(${DIAL_OUT_${ARG1}})})
> exten => s,7,Dial(${OUT_${ARG1}}/${ARG2:${length}})
> exten => s,8,Congestion
> exten => s,108,Macro(outisbusy)
>
> ; dialout using default OUT trunk - no prefix
> [macro-dialout-default]
> exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT)
> exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?5) ;check for  
> CID override
> for exten
> exten => s,3,SetCallerID(${ECID${CALLERIDNUM}})
> exten => s,4,Goto(7)
> exten => s,5,GotoIf($[foo${OUTCID} = foo]?7) ;check for CID override  
> for trunk
> exten => s,6,SetCallerID(${OUTCID})
> exten => s,7,Dial(${OUT}/${ARG1})
> exten => s,8,Congestion
> exten => s,108,Macro(outisbusy)
>
> ; dialout using a trunk, using pattern matching (don't strip any  
> prefix)
> ; arg1 = trunk number, arg2 = number, arg3 = route password
> [macro-dialout-trunk]
> exten => s,1,GotoIf($[foo${ARG3} = foo]?3:2)) ; arg3 is pattern  
> password
> exten => s,2,Authenticate(${ARG3})
> exten => s,3,Macro(record-enable,${CALLERIDNUM},OUT)
> exten => s,4,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?7) ;check for  
> CID override
> for exten
> exten => s,5,SetCallerID(${ECID${CALLERIDNUM}})
> exten => s,6,Goto(9)
> exten => s,7,GotoIf($[foo${OUTCID_${ARG1}} = foo]?9) ;check for CID  
> override for
> trunk
> exten => s,8,SetCallerID(${OUTCID_${ARG1}})
> exten => s,9,SetGroup(OUT_${ARG1})
> exten => s,10,CheckGroup(${OUTMAXCHANS_${ARG1}})
> ; if we've used up the max channels, continue at 109 (n+101)
> exten => s,11,SetVar(DIAL_NUMBER=${ARG2})
> exten => s,12,SetVar(DIAL_TRUNK=${ARG1})
> exten => s,13,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the  
> proper dial
> string for this trunk
> exten => s,14,SetVar(OUTNUM=${OUTPREFIX_${ARG1}}${DIAL_NUMBER}) ;  
> OUTNUM is the
> final dial number
> exten => s,15,Cut(custom=OUT_${ARG1},:,1) ; Custom trunks are prefixed  
> with "AMP:"
> exten => s,16,GotoIf($[${custom} = AMP]?19)
> exten => s,17,Dial(${OUT_${ARG1}}/${OUTNUM}) ; Regular Trunk Dial
> exten => s,18,Goto(s-${DIALSTATUS},1)
>
> ; This is a custom trunk. Substitute $OUTNUM$ with the actual number  
> and rebuild
> the dialstring
> ; example trunks: "AMP:CAPI/XXXXXXXX:b$OUTNUM$,30,r",
> "AMP:OH323/$OUTNUM$@XX.XX.XX.XX:XXXX"
> exten => s,19,Cut(pre_num=OUT_${ARG1},$,1)
> exten => s,20,Cut(the_num=OUT_${ARG1},$,2) ; this is where we expect  
> to find
> string OUTNUM
> exten => s,21,Cut(post_num=OUT_${ARG1},$,3)
> exten => s,22,GotoIf($[${the_num} = OUTNUM]?23:24) ; if we didn't find  
> "OUTNUM",
> then skip to Dial
> exten => s,23,SetVar(the_num=${OUTNUM}) ; replace "OUTNUM" with the  
> actual
> number to dial
> exten => s,24,Dial(${pre_num:4}${the_num}${post_num})
> exten => s,25,Goto(s-${DIALSTATUS},1)
>
> exten => s,111,Noop(max channels used up)
> exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
> exten => s-BUSY,2,Busy()
> exten => s-BUSY,3,Wait(60)
> exten => s-BUSY,4,NoOp()
>
> exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})
>
> ; Adds a dynamic agent/member to a Queue
> ; Prompts for call-back number - in not entered, uses CIDNum
> [macro-agent-add]
> exten => s,1,Wait(1)
> exten => s,2,NoOp
> exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from  
> user
> exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7)) ; if user just  
> pressed # or
> timed out, use cidnum
> exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM})
> exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2)) ; if still no  
> number, start over
> exten => s,7,GotoIf($[foo${ARG2} = foo]?9:8)) ; arg2 is queue password
> exten => s,8,Authenticate(${ARG2})
> exten =>  
> s,9,AddQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal) ; using
> chan_local allows us to have agents over trunks
> exten => s,10,Wait(1)
> exten => s,11,Playback(agent-loginok)
> exten => s,12,Hangup()
>
> ; Removes a dynamic agent/member from a Queue
> ; Prompts for call-back number - in not entered, uses CIDNum
> [macro-agent-del]
> exten => s,1,Wait(1)
> exten => s,2,NoOp
> exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from  
> user
> exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7)) ; if user just  
> pressed # or
> timed out, use cidnum
> exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM})
> exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2)) ; if still no  
> number, start over
> exten =>  
> s,7,RemoveQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal)
> exten => s,8,Wait(1)
> exten => s,9,Playback(agent-loggedoff)
> exten => s,10,Hangup()
>
> ; arg1 = trunk number, arg2 = number
> [macro-dialout-enum]
> exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT)
> exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?3) ;check for  
> CID override
> for exten
> exten => s,3,SetCallerID(${ECID${CALLERIDNUM}})
> exten => s,4,Goto(7)
> exten => s,5,GotoIf($[foo${OUTCID_${ARG1}} = foo]?7) ;check for CID  
> override for
> trunk
> exten => s,6,SetCallerID(${OUTCID_${ARG1}})
> exten => s,7,SetGroup(OUT_${ARG1})
> exten => s,8,CheckGroup(${OUTMAXCHANS_${ARG1}}) ; if we've used up the  
> max
> channels, continue at 108 (n+101)
> exten => s,9,SetVar(DIAL_NUMBER=${ARG2})
> exten => s,10,SetVar(DIAL_TRUNK=${ARG1})
> exten => s,11,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the  
> proper dial
> string for this trunk
> exten => s,12,EnumLookup(${DIAL_NUMBER})
> exten => s,13,GotoIf($[$[${ENUM:0:3} = SIP] | $[${ENUM:0:3} =  
> IAX]]?14:63)
> exten => s,14,Dial(${ENUM})
> exten => s,15,Goto(s-${DIALSTATUS},1)
> ; if dial fails (ie, all channels are busy), continue at 116 (n+101)
>
> ; exit points for macro
> exten => s,63,NoOp(EnumLookup failed)
> exten => s,109,NoOp(max channels used up)
>
> exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
> exten => s-BUSY,2,Busy()
> exten => s-BUSY,3,Wait(60)
> exten => s-BUSY,4,NoOp()
>
> exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})
>
> [macro-record-enable]
> exten => s,1,GotoIf(${LEN(${BLINDTRANSFER})} > 0?2:4)
> exten => s,2,ResetCDR(w)
> exten => s,3,StopMonitor()
> exten => s,4,GotoIf($["${ARG2}" = "OUT"]?5:8)
> exten => s,5,DBGet(RecEnable=RECORD-OUT/${ARG1})
> exten => s,6,SetVar(CALLFILENAME=OUT${ARG1}-${TIMESTAMP}-${UNIQUEID})
> exten => s,7,Goto(s,14)
> exten => s,8,GotoIf($["${ARG2}" = "Group"]?9:12)
> exten => s,9,AGI(recordingcheck)
> exten => s,10,SetVar(CALLFILENAME=g${ARG1}-${TIMESTAMP}-${UNIQUEID})
> exten => s,11,Goto(s,14)
> exten => s,12,DBGet(RecEnable=RECORD-IN/${ARG1})
> exten => s,13,SetVar(CALLFILENAME=${TIMESTAMP}-${UNIQUEID})
> exten => s,14,GotoIf($["${RecEnable}" = "ENABLED"]?15:99)
> exten => s,15,Monitor(wav49,${CALLFILENAME}, mb)
> exten => s,99,Noop(NO RECORDING NEEDED)
> ;exten => s,3,BackGround(for-quality-purposes)
> ;exten => s,4,BackGround(this-call-may-be)
> ;exten => s,5,BackGround(recorded)
>
> ; This macro is for dev purposes and just dumps channel/app variables.  
> Useful
> when designing new contexts.
> [macro-dumpvars]
> exten => s,1,Noop(ACCOUNTCODE=${ACCOUNTCODE})
> exten => s,2,Noop(ANSWEREDTIME=${ANSWEREDTIME})
> exten => s,3,Noop(BLINDTRANSFER=${BLINDTRANSFER})
> exten => s,4,Noop(CALLERID=${CALLERID})
> exten => s,5,Noop(CALLERIDNAME=${CALLERIDNAME})
> exten => s,6,Noop(CALLERIDNUM=${CALLERIDNUM})
> exten => s,7,Noop(CALLINGPRES=${CALLINGPRES})
> exten => s,8,Noop(CHANNEL=${CHANNEL})
> exten => s,9,Noop(CONTEXT=${CONTEXT})
> exten => s,10,Noop(DATETIME=${DATETIME})
> exten => s,11,Noop(DIALEDPEERNAME=${DIALEDPEERNAME})
> exten => s,12,Noop(DIALEDPEERNUMBER=${DIALEDPEERNUMBER})
> exten => s,13,Noop(DIALEDTIME=${DIALEDTIME})
> exten => s,14,Noop(DIALSTATUS=${DIALSTATUS})
> exten => s,15,Noop(DNID=${DNID})
> exten => s,16,Noop(EPOCH=${EPOCH})
> exten => s,17,Noop(EXTEN=${EXTEN})
> exten => s,18,Noop(HANGUPCAUSE=${HANGUPCAUSE})
> exten => s,19,Noop(INVALID_EXTEN=${INVALID_EXTEN})
> exten => s,20,Noop(LANGUAGE=${LANGUAGE})
> exten => s,21,Noop(MEETMESECS=${MEETMESECS})
> exten => s,22,Noop(PRIORITY=${PRIORITY})
> exten => s,23,Noop(RDNIS=${RDNIS})
> exten => s,24,Noop(SIPDOMAIN=${SIPDOMAIN})
> exten => s,25,Noop(SIP_CODEC=${SIP_CODEC})
> exten => s,26,Noop(SIPCALLID=${SIPCALLID})
> exten => s,27,Noop(SIPUSERAGENT=${SIPUSERAGENT})
> exten => s,28,Noop(TIMESTAMP=${TIMESTAMP})
> exten => s,29,Noop(TXTCIDNAME=${TXTCIDNAME})
> exten => s,30,Noop(UNIQUEID=${UNIQUEID})
> exten => s,31,Noop(TOUCH_MONITOR=${TOUCH_MONITOR})
> exten => s,32,Noop(MACRO_CONTEXT=${MACRO_CONTEXT})
> exten => s,33,Noop(MACRO_EXTEN=${MACRO_EXTEN})
> exten => s,34,Noop(MACRO_PRIORITY=${MACRO_PRIORITY})
>
> ;  
> ####################################################################### 
> #####
> ; Applications [app]
> ;  
> ####################################################################### 
> #####
> ;
> [app-directory]
> ;DIR-CONTEXT set in Digital Receptionist
> exten => #,1,Wait(1)
> exten =>
> #,2,AGI(directory,${DIR-CONTEXT},ext-local,${DIRECTORY:0: 
> 1}${DIRECTORY_OPTS}o)
> exten => #,3,Playback(vm-goodbye)
> exten => #,4,Hangup
> ; *411 will access the entire directory (not just a single context)
> exten => *411,1,Answer
> exten => *411,2,Wait(1)
> exten =>  
> *411,3,AGI(directory,general,ext-local,${DIRECTORY:0: 
> 1}${DIRECTORY_OPTS})
> exten => *411,4,Playback(vm-goodbye)
> exten => *411,5,Hangup
> exten => h,1,Hangup
> exten => o,1,GotoIf($["foo${FROM_DID}" =
> "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1)
>
> [app-dnd]
> exten => *78,1,Answer
> exten => *78,2,Wait(1)
> exten => *78,3,DBput(DND/${CALLERIDNUM}=YES)
> exten => *78,4,Playback(allison7/do-not-disturb)
> exten => *78,5,Playback(activated)
> exten => *78,6,Macro(hangupcall)
> exten => *79,1,Answer
> exten => *79,2,Wait(1)
> exten => *79,3,DBdel(DND/${CALLERIDNUM})
> exten => *79,4,Playback(allison7/do-not-disturb)
> exten => *79,5,Playback(de-activated)
> exten => *79,6,Macro(hangupcall)
>
> [app-messagecenter]
> exten => *98,1,Answer
> exten => *98,2,Wait(1)
> exten => *98,3,VoiceMailMain(default)
> exten => *98,4,Macro(hangupcall)
> exten => _*98X.,1,Answer ; can dial *98 to skip 'mailbox' prompt.  
> Useful for
> speedial.
> exten => _*98X.,2,Wait(1)
> exten => _*98X.,3,VoiceMailMain(${EXTEN:3}@default)
> exten => _*98X.,4,Macro(hangupcall)
> exten => *97,1,Answer
> exten => *97,2,Wait(1)
> exten => *97,3,VoicemailMain(${CALLERIDNUM}@default)
> exten => *97,4,Macro(hangupcall)
>
> [app-callwaiting]
> exten => *70,1,Answer
> exten => *70,2,Wait(1)
> exten => *70,3,DBput(CW/${CALLERIDNUM}=ENABLED)
> exten => *70,4,Playback(callwaiting)
> exten => *70,5,Playback(activated)
> exten => *70,6,Macro(hangupcall)
> exten => *71,1,Answer
> exten => *71,2,Wait(1)
> exten => *71,3,DBdel(CW/${CALLERIDNUM})
> exten => *71,4,Playback(callwaiting)
> exten => *71,5,Playback(de-activated)
> exten => *71,6,Macro(hangupcall)
>
> [app-callforward]
> ; dialed call forward app - forwards calling extension
> exten => _*72.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:3})
> exten => _*72.,2,Answer
> exten => _*72.,3,Wait(1)
> exten => _*72.,4,Playback(loligo/call-fwd-unconditional)
> exten => _*72.,5,Playback(loligo/for)
> exten => _*72.,6,Playback(loligo/extension)
> exten => _*72.,7,SayDigits(${CALLERIDNUM})
> exten => _*72.,8,Playback(loligo/is-set-to)
> exten => _*72.,9,SayDigits(${EXTEN:3})
> exten => _*72.,10,Macro(hangupcall)
> ; prompting call forward app - forwards entered extension
> exten => *72,1,Answer
> exten => *72,2,Wait(1)
> exten => *72,3,BackGround(allison7/please-enter-your)
> exten => *72,4,Playback(extension)
> exten => *72,5,Read(fromext,then-press-pound)
> exten => *72,6,Wait(1)
> exten => *72,7,BackGround(ent-target-attendant)
> exten => *72,8,Read(toext,then-press-pound)
> exten => *72,9,Wait(1)
> exten => *72,10,DBput(CF/${fromext}=${toext})
> exten => *72,11,Playback(call-fwd-unconditional)
> exten => *72,12,Playback(for)
> exten => *72,13,Playback(extension)
> exten => *72,14,SayDigits(${fromext})
> exten => *72,15,Playback(is-set-to)
> exten => *72,16,SayDigits(${toext})
> exten => *72,17,Macro(hangupcall)
> ; cancels dialed extension call forward
> exten => _*73.,1,DBdel(CF/${EXTEN:3})
> exten => _*73.,2,Answer
> exten => _*73.,3,Wait(1)
> exten => _*73.,4,SayDigits(${EXTEN:3})
> exten => _*73.,5,Playback(call-fwd-cancelled)
> exten => _*73.,6,Macro(hangupcall)
> ; cancels call forward for calling extension
> exten => *73,1,DBdel(CF/${CALLERIDNUM})
> exten => *73,2,Answer
> exten => *73,3,Wait(1)
> exten => *73,4,Playback(loligo/call-fwd-cancelled)
> exten => *73,5,Macro(hangupcall)
> ; dialed call forward on busy app - forwards calling extension when  
> busy
> exten => _*90.,1,DBput(CFB/${CALLERIDNUM}=${EXTEN:3})
> exten => _*90.,2,Answer
> exten => _*90.,3,Wait(1)
> exten => _*90.,4,Playback(loligo/call-fwd-on-busy)
> exten => _*90.,5,Playback(loligo/for)
> exten => _*90.,6,Playback(loligo/extension)
> exten => _*90.,7,SayDigits(${CALLERIDNUM})
> exten => _*90.,8,Playback(loligo/is-set-to)
> exten => _*90.,9,SayDigits(${EXTEN:3})
> exten => _*90.,10,Macro(hangupcall)
> ; cancels call forward on busy for calling extension
> exten => *91,1,DBdel(CFB/${CALLERIDNUM})
> exten => *91,2,Answer
> exten => *91,3,Wait(1)
> exten => *91,4,Playback(call-fwd-on-busy)
> exten => *91,5,Playback(de-activated)
> exten => *91,6,Macro(hangupcall)
> exten => h,1,Hangup
>
> [app-calltrace]
> ; We can't have our timeouts or dial digits collide with other  
> applications
> ; or extensions, so we build the app in pieces
> exten => *69,1,Goto(app-calltrace-perform,s,1)
>
> [app-calltrace-perform]
> exten => s,1,Answer
> exten => s,2,Wait(1)
> exten => s,3,Background(allison7/info-about-last-call)
> exten => s,4,Background(allison7/telephone-number)
> exten => s,5,Dbget(lastcaller=CALLTRACE/${CALLERIDNUM})
> exten => s,6,GotoIf($[${lastcaller}]?7:13)
> exten => s,7,SayDigits(${lastcaller})
> exten => s,8,DigitTimeout(3)
> exten => s,9,ResponseTimeout(7)
> exten => s,10,Background(loligo/to-call-this-number)
> exten => s,11,Background(allison7/press-1)
> exten => s,12,Goto(15)
> exten => s,13,Playback(loligo/from-unknown-caller)
> exten => s,14,Macro(hangupcall)
> exten => s,15,NoOp
> exten => 1,1,Goto(from-internal,${lastcaller},1);
> exten => i,1,Playback(vm-goodbye)
> exten => i,2,Macro(hangupcall)
> exten => t,1,Playback(vm-goodbye)
> exten => t,2,Macro(hangupcall)
>
> ;  
> ####################################################################### 
> #####
> ; Inbound Contexts [from]
> ;  
> ####################################################################### 
> #####
>
> [from-sip-external]
>
> ;give external sip users congestion and hangup
> exten => _.,1,AbsoluteTimeout(15)
> exten => _.,2,Congestion
> exten => _.,3,Hangup
>
> [from-internal]
> ;allow phones to use applications
> include => app-directory
> include => app-dnd
> include => app-callforward
> include => app-callwaiting
> include => app-messagecenter
> include => app-calltrace
> include => parkedcalls
> include => from-internal-custom
> ;allow phones to dial other extensions
> include => ext-fax
> include => ext-local
> include => ext-group
> include => ext-queues
> include => ext-zapbarge
> include => ext-meetme
> include => ext-record
> include => ext-test
> ;allow phones to access trunks
> include => outbound-allroutes
> exten => s,1,Macro(hangupcall)
> exten => h,1,Macro(hangupcall)
>
> ;  
> ####################################################################### 
> #####
> ; Extension Contexts [ext]
> ;  
> ####################################################################### 
> #####
>
> [ext-zapbarge]
> exten => 888,1,SetGroup(${CALLERIDNUM})
> exten => 888,2,Answer
> exten => 888,3,Wait(1)
> exten => 888,4,ZapBarge
> exten => 888,5,Hangup
>
> [ext-meetme]
> exten => _8X,1,Answer
> exten => _8X,2,Wait(1)
> exten => _8X,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
> exten => _8X,4,MeetMe(${EXTEN}|sM)
> exten => _8X,5,MeetMe(${EXTEN}|asM)
>
> exten => _8XX,1,Answer
> exten => _8XX,2,Wait(1)
> exten => _8XX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
> exten => _8XX,4,MeetMe(${EXTEN}|sM)
> exten => _8XX,5,MeetMe(${EXTEN}|asM)
>
> exten => _8XXX,1,Answer
> exten => _8XXX,2,Wait(1)
> exten => _8XXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
> exten => _8XXX,4,MeetMe(${EXTEN}|sM)
> exten => _8XXX,5,MeetMe(${EXTEN}|asM)
>
> exten => _8XXXX,1,Answer
> exten => _8XXXX,2,Wait(1)
> exten => _8XXXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
> exten => _8XXXX,4,MeetMe(${EXTEN}|sM)
> exten => _8XXXX,5,MeetMe(${EXTEN}|asM)
>
> [ext-fax]
> exten => s,1,Answer
> exten => s,2,Goto(in_fax,1)
> exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1)
> exten => in_fax,2,Macro(faxreceive)
> exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} |  
> ps2pdf -
> ${FAXFILE}.pdf)
> exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject  
> "Fax from
> ${CALLERIDNUM} ${CALLERIDNAME}" --attachment ${CALLERIDNUM}.pdf --type
> application/pdf --file ${FAXFILE}.pdf)
> exten => in_fax,5,system(rm ${FAXFILE} ${FAXFILE}.pdf)
> exten => in_fax,6,Hangup
> exten => analog_fax,1,GotoIf($[${FAX_RX} = disabled]?3:2) ;if fax is  
> disabled,
> just hang up
> exten => analog_fax,2,Dial(${FAX_RX},20,d)
> exten => analog_fax,3,Hangup
> ;exten => out_fax,1,wait(7)
> exten => out_fax,1,txfax(${TXFAX_NAME}|caller)
> exten => out_fax,2,Hangup
> exten => h,1,Hangup()
>
> [ext-record]
> exten => *77,1,Wait(2)
> exten => *77,2,Record(${CALLERIDNUM}ivrrecording:wav)
> exten => *77,3,Wait(2)
> exten => *77,4,Hangup
> exten => *99,1,Playback(${CALLERIDNUM}ivrrecording)
> exten => *99,2,Wait(2)
> exten => *99,3,Hangup
>
> ;this is where parked calls go if they time-out. Should probably  
> re-ring
> [default]
> include => ext-local
> exten => s,1,Playback(vm-goodbye)
> exten => s,2,Macro(hangupcall)
>
> [ext-test]
> exten => 7777,1,Goto(from-pstn,s,1)
> exten => 666,1,Goto(ext-fax,in_fax,1)
> exten => h,1,Macro(hangupcall)
>
> ;echo test
> exten => *43,1,Answer
> exten => *43,2,Wait(2)
> exten => *43,3,Playback(demo-echotest)
> exten => *43,4,Echo
> exten => *43,5,Playback(demo-echodone)
> exten => *43,6,Hangup
>
> -------------------------------------------------
> This mail sent through IMP: http://horde.org/imp/
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list