[Asterisk-Users] DELL 2800 : PCI Parity error

[list]

Still not resolved

On Wed, 2005-06-08 at 01:16, David John Walsh wrote:
> Frank
> 
> Did you ever resolve this?  If so what was the issue?
> 
> On 03/05/05, list <list at nax.no> wrote:
> > Hi,
> > I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error
> > (EB113 on the display)
> > I am learning linux and asterisk as I go along, there might be obvious
> > things I should know, but bear with me.
> > 
> > >From demsg below my 2 digium cards installed are listed (no config or
> > connections done to digium cards yet), the conflict is with the TDM400P
> > card, without that card, in any slot, no alarm.
> > 
> >         Zapata Telephony Interface Registered on major 196
> >         Registered Tormenta2 PCI
> >         Controller version: 24
> >         FALC version: 00000000
> >         TE110P: Setting up global serial parameters for E1 FALC V1.2
> >         TE110P: Successfully initialized serial bus for card
> >         Found a Wildcard: Digium Wildcard TE110P T1/E1
> >         Freshmaker version: 71
> >         Freshmaker passed register test
> >         Uhhuh. NMI received. Dazed and confused, but trying to continue
> >         You probably have a hardware problem with your RAM chips
> >         Module 0: Installed -- AUTO FXS/DPO
> >         Module 1: Not installed
> >         Module 2: Not installed
> >         Module 3: Installed -- AUTO FXO (FCC mode)
> >         Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
> >         Registered tone zone 8 (Norway)
> >         TE110P: Span configured for CCS/HDB3/CRC4
> >         Calling startup (flags is 4099)
> >         wcte1xxp: Setting yellow alarm
> >         usb.c: registered new driver wcusb
> >         Wildcard USB FXS Interface driver registered
> >         TE110P: Span configured for CCS/HDB3/CRC4
> >         Calling startup (flags is 4099)
> >         Registered tone zone 8 (Norway)
> >         TE110P: Span configured for CCS/HDB3/CRC4
> >         Calling startup (flags is 4099)
> >         Registered tone zone 8 (Norway)
> > 
> > ramchip problem is false, without the card all ok, ramtests on machine
> > as well.
> > 
> > lsmod shows wcusb driver on zaptel, I dont need that, can I remove it?
> > is that a problem or not?
> > 
> >         # lsmod
> >         Module                  Size  Used by    Not tainted
> >         usbserial              23964   0  (autoclean) (unused)
> >         lp                      9156   0  (autoclean)
> >         parport                38848   0  (autoclean) [lp]
> >         autofs4                16984   0  (autoclean) (unused)
> >         wcusb                  19552   0  (unused)
> >         wctdm                  41088   0  (unused)
> >         wcte11xp               22048   0  (unused)
> >         zaptel                182080   4  [wcusb wctdm wcte11xp]
> >         e1000                  77884   1  (autoclean)
> >         floppy                 57552   0  (autoclean)
> >         sg                     37388   0  (autoclean)
> >         microcode               6912   0  (autoclean)
> >         ide-cd                 34016   0  (autoclean)
> >         cdrom                  32896   0  (autoclean) [ide-cd]
> >         keybdev                 2976   0  (unused)
> >         mousedev                5688   1
> >         hid                    22308   0  (unused)
> >         input                   6176   0  [keybdev mousedev hid]
> >         ehci-hcd               20776   0  (unused)
> >         usb-uhci               26860   0  (unused)
> >         usbcore                81152   1  [usbserial wcusb hid ehci-hcd
> >         usb-uhci]
> >         ext3                   89960   6
> >         jbd                    55060   6  [ext3]
> >         megaraid2              38344   7
> >         diskdumplib             5228   0  [megaraid2]
> >         sd_mod                 13904  14
> >         scsi_mod              115112   2  [sg megaraid2 sd_mod]
> > 
> > finally my interrupts, bit confusing to me, looks like I have dual
> > processor, can see the NMI but what else can be found here?
> > 
> >         # cat /proc/interrupts
> >                    CPU0       CPU1
> >           0:    3298395    3303167    IO-APIC-edge  timer
> >           1:       3300       2876    IO-APIC-edge  keyboard
> >           2:          0          0          XT-PIC  cascade
> >           8:          0          1    IO-APIC-edge  rtc
> >          12:     236637     237965    IO-APIC-edge  PS/2 Mouse
> >          14:     261779     262965    IO-APIC-edge  ide0
> >          16:          0          0   IO-APIC-level  usb-uhci
> >          18:          0          0   IO-APIC-level  usb-uhci
> >          19:          0          0   IO-APIC-level  usb-uhci
> >          23:          0         24   IO-APIC-level  ehci-hcd
> >          29:   33133540   32846566   IO-APIC-level  t1xxp
> >          38:      72500      83317   IO-APIC-level  megaraid
> >          58:   32838989   33150525   IO-APIC-level  wctdm
> >          72:     222855         12   IO-APIC-level  eth0
> >         NMI:          1          0
> >         LOC:    6601462    6601460
> >         ERR:          0
> >         MIS:          0
> > 
> > any suggestions from someone experienced something similar?
> > 
> > regards
> > Frank
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users