[Asterisk-Users] Dial 9 to PBX to PSTN pattern question

[Bill Wesson]

Bill Wesson wrote:

> My question: How do I configure AAH via AMP to make a connection 
> through our legacy PBX to the PSTN?
>  
> Details:
> We're trying out Asterisk through Asterisk @ Home.
>  
> Our legacy PBX has a modem type dial tone port that we hooked a Digium 
> FXO to.
>  
> Now I can dial from the XTEN client on my computer to any legacy PBX 
> extension.
>  
> If I connect a regular phone to the modem dial tone port, I can dial 9 
> to get an outside line.
>  
> Replacing the phone line back to the Digium FXO port, I cannot dial 9 
> and the phone number to route my call to the PSTN through the legacy PBX.
>  
> Looking at the AMP (Asterisk Management Portal)=>Outbound Route, I 
> have two routes created:
> PBX=>to several legacy PBX extensions: 250, 270, 280 (these are the 
> dial patterns) 9_outside=>to the default dial pattern included with 
> AAH: 9|. (that is the sole dial pattern)
>  
> I wonder if the digits get dialed too fast to connect to the PSTN? Can 
> I put a pause in somehow?
>  
> I can see that Asterisk does grab the outside line.
> When I dial, I get the following message, which I think is coming from 
> the PSTN:
> "We're sorry your call did not go through, Will you please hang up and 
> try your call again. This is a recording."
> Any ideas anyone?
>  
> Thanks,
> --Bill
> Phoenix, AZ
>  

Are you dialing 99?
First 9 gets you to the FXO, second 9 gets you through the PBX

Keep in mind that Asterisk doesn't bother with such small details as "listen
for dial tone" before dialing so it is also possible that digits are getting
lost.
Are the digits Asterisk is dialing too short in duration for the PBX to
understand?
Is the interdigital time wrong for the destination PBX?
Do you have any sort of digit grabber you can place on the output to
determine what is and is not getting through?
AAH can be tricky when it comes to modifying the dial string.
A wait before dialing can be inserted, but DTMF duration and interdigital
time will need the source modified.

John Novack

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


It is definitely a timing issue. If I dial four nines and the phone number
it works. 

I dial 99996025551212 it works. -- 9999 - area code - phone number

What I need is a pause after it hits the 9 needed for the outside line to
give it a couple of seconds to get PSTN dial tone.

In modem communications you could insert commas that have a value of 2
seconds. I thought I saw somewhere in the Asterisk documentation I could
insert 'w' for the same effect. If so, where? which file? syntax?

Thanks,
Bill Wesson